| track_warrior |
07-28-2013 01:40 AM |
Help!! Car stuck on 4 post lift
Any garage lift experts on the forum?
Ok guys well I bought a 4 post atlas pro 8000 lift around 7 months ago and about 3 weeks ago it started acting weird. I tried lifting it to get it off the locks so I could lower the FR-S and the lift motor sounded normal but nothing happened. I called the lift store support and they told me to check the release valve. Magically as always when you are trying to show a problem I came out and tried it again and it worked perfectly, the support guy said sometimes debris gets stuck and it needs a purge.
I took the FR-S out and put the porsche on the lift and raised it to the desired height and let the lift rest on the locks taking off the pressure from the hydraulic system. Today i tried lifting the Porsche to get it off the locks so I could lower it and store the FR-S but the lift does not move at all, the motor sounds normal and everything. I tried purging the lift by holding the release valve and up button at the same time but no go, I also checked the release valve to see if it was stuck and its not then i topped it off with a bit more hydraulic fluid but nothing seems to work. Since the early AM i have been letting it rest and trying again but nada the lift wont move at all. :confused2
Any help is appreciated, thanks in advance.
Here are some pics of the lift that i am talking about for reference Atlas Pro 8000 4 post lift:
http://i23.photobucket.com/albums/b3...ps59cf2637.jpg
http://i23.photobucket.com/albums/b3...psecfb6c82.jpg
|