Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Need Opinions on Wheel Offset (+35 or +15) for Flush Fitment (https://www.ft86club.com/forums/showthread.php?t=42770)

Dustin2JZ 07-27-2013 04:11 PM

Need Opinions on Wheel Offset (+35 or +15) for Flush Fitment
 
Ok I am Finally getting read to buy my wheels, but i'm not sure what offset I should buy.

I am a big fan of the hellaflush look so I want it to have as much poke as possible. I just don't want it to Rub reall bad (to the point of burning paint)

The wheels I am getting are 19 x 8.5 Either + 35 or +15


Tires will be 225/35/19

And I am going with just springs right now (1.4" drop)
I will be doing Bags later on, but I will hopefull be able to get the SSR's I want then.


The biggest issue I have is, I am not sure if I will have to Roll/Pull the fenders to run the +15 (Which I may do anyway)

Just Looking for opinions from others that like the Flush Look.

Drftfan 07-27-2013 04:59 PM

+15. But yes you may have to roll your fenders cause of the size of the wheel. Your not gonna get much stretch if any and because of the 19's your putting the wheel itself closer to the fenders

Dustin2JZ 07-27-2013 05:00 PM

Quote:

Originally Posted by Drftfan (Post 1100642)
Your not gonna get much stretch if any and because of the 19's your putting the wheel itself closer to the fenders


Exactly



And the main reason I am doing 19's is because I want to see how they look before I dump 3K on the SSR's i want.

Drftfan 07-27-2013 05:03 PM

35 if you don't want to have to roll. You could always add spacers. I did a 5mm on my 17x9's in the rear the other day and it immediately made it look better

Dustin2JZ 07-30-2013 03:20 PM

Ordered the +15 will post pics one they are on

xia 07-30-2013 04:54 PM

I have 8.25 +25 front and they poke out enough already. +15 will definitely poke out much.

OrbitalEllipses 07-30-2013 05:27 PM

Quote:

Originally Posted by Dustin2JZ (Post 1100570)
I am a big fan of the hellaflush look so I want it to have as much poke as possible. I just don't want it to Rub reall bad (to the point of burning paint)

Oh no, burnt Ignition Silver would be a tragedy!

Dustin2JZ 07-30-2013 07:08 PM

Quote:

Originally Posted by OrbitalEllipses (Post 1106696)
Oh no, burnt Ignition Silver would be a tragedy!

Lol exactly. I will not let that happen

WolfsFang 07-30-2013 07:19 PM

This was on stock suspension, with my stance coils I have a little more camber.

This is how a +14 looks (front)
http://i169.photobucket.com/albums/u...4/IMAG0031.jpg

and a +16 (rear)
http://i169.photobucket.com/albums/u...4/IMAG0030.jpg

Dustin2JZ 07-30-2013 07:24 PM

Quote:

Originally Posted by WolfsFang (Post 1106942)
This was on stock suspension, with my stance coils I have a little more camber.

This is how a +14 looks (front)

and a +16 (rear)


The rear is 9.5" aswell right, so its .5" further out.
I think the +15 8.5s will do just fine.

WolfsFang 07-30-2013 09:10 PM

Quote:

Originally Posted by Dustin2JZ (Post 1106951)
The rear is 9.5" aswell right, so its .5" further out.
I think the +15 8.5s will do just fine.

the front is 8.5 and rear 9.5

Dustin2JZ 07-30-2013 09:16 PM

Quote:

Originally Posted by WolfsFang (Post 1107148)
the front is 8.5 and rear 9.5

Right. Yeah that's what I read in you post. Nice old school look you got there too. These cars look so good slammed. You should let me feature your whip on my site www.statuslow.com

donutfilling 07-30-2013 09:31 PM

it will fit fine, you just need some camber.

Dustin2JZ 07-30-2013 09:33 PM

How much camber can I get with a 1.6" drop. I got the Vogtland springs. And heard the settle even more so....


All times are GMT -4. The time now is 12:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.