Subwoofer/Amp install problem
 

I was installing my 2 Rockford Fosgate 10" subs and my 3000W amp tonight and once i got all the wiring done (and yes it was done right) the amp powers up but no sound from the subs.

I tweaked all the dials on the amp, played with the configuration of the RCA cables.

I am wondering if the RCA jacks on the back of the factory head unit are possibly RCA ins/outs? whichever are the wrong ones haha.

And to make sure i am correct which wire needed to be tapped into to for the remote wire?

I do have the non-touch screen head unit so there is just one sec of RCA jacks on the back of it.

Thanks for all help in advance.

i think there is a setting in the base headunit that u have to turn on the RCA's. its in one of the threads here. not sure which one but i do remember reading it

yea it's definitely somewhere in the forums but basically these are the steps:

1. turn off stereo
2. push multifunction knob
3. go to sub-w setting
4. switch to on
5. turn on stereo

thanks i really appreciate it, i was up doing this at 530 in the morning so i wasnt using my head too much haha

what "3000watt" amp do you have on your subs? the reason i ask is that the stock electrical cannot sustain 3kwrms.