Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Forced Induction (https://www.ft86club.com/forums/forumdisplay.php?f=78)
-   -   Nameless releasing Sensor Plate for Innovate Motorsports BRZ/FRS/GT86 Twin Screw (https://www.ft86club.com/forums/showthread.php?t=42072)

xjohnx 07-19-2013 07:43 AM
Nameless releasing Sensor Plate for Innovate Motorsports BRZ/FRS/GT86 Twin Screw
 
Just saw this on their Facebook:
https://fbcdn-sphotos-c-a.akamaihd.n...02226388_o.jpg

Quote:
A little better look at our Innovate Motorsports BRZ/FRS/GT86 Twin Screw Sensor Plate from Nameless Performance. Replaces the MAP sensor plate and adds a Boost Air Temp & Boost Signal Ports, also allowing for 3rd Party MAP Sensors (GM 2 Bar, etc). They gave us just enough real estate to put all this functionality into a 2.5"x1.5"x1" package.

Available pre-loaded with T1 Motorsports Development Low Profile/Mini Linear IAT Sensor, a variety of boost signal fittings and a few different gauge options as well as harness ready MAP Sensors.

More Innovate Motorsports / Sprintex Twin Screw Mods on the way...

Carlitoz3 07-19-2013 08:36 AM
How about they finish up the headers first??

Raven604 07-19-2013 10:22 AM
^indeed

nix 07-19-2013 10:45 AM
Quote:
Originally Posted by Carlitoz3 (Post 1081139)
How about they finish up the headers first??
Shh this is :w00t:

Gary in NJ 07-19-2013 10:48 AM
Right. The market for this sensor adapter is limited, at best. The market for the header is...well...less limited. It sucks developing products for a small market.

Raven604 07-19-2013 10:51 AM
Quote:
Originally Posted by Gary in NJ (Post 1081303)
Right. The market for this sensor adapter is limited, at best. The market for the header is...well...less limited. It sucks developing products for a small market.
There's probably 100s waiting to buy that header....

canu_50 07-19-2013 11:01 AM
There is probably 2 team working on 2 different project....

nonicname 07-19-2013 11:03 AM
don't understand what this does?

spitfire481 07-19-2013 11:50 AM
Quote:
Originally Posted by nonicname (Post 1081332)
don't understand what this does?
gives you a post blower air temp sensor (factory one is in the maf so its almost useless with a non blow through maf setup), a boost port for gauge, meth controller, etc. and a map sensor port for tuning, data logging, etc. the temp sensor will be useful

jamesm 07-19-2013 11:52 AM
this will solve the problem of not being able to properly compensate for iat. nice! but seeing solidworks models gives me bad memories of my old job, so thanks for that :)

EAGLE5 07-19-2013 11:55 AM
It allows easier adding of sensors to assist in tuning.

Lawnik 07-19-2013 08:28 PM
This part gives the SC more appeal. I cant wait to see the results on a full nameless/innovate setup.

OrbitalEllipses 07-19-2013 08:33 PM
Quote:
Originally Posted by canu_50 (Post 1081330)
There is probably 2 team working on 2 different project....
Nope, they're a small operation.

SmsAlSuwaidi 07-19-2013 08:45 PM
Quote:
Originally Posted by OrbitalEllipses (Post 1082850)
Nope, they're a small operation.
Very small if I recall


All times are GMT -4. The time now is 03:04 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.