Good Vinyl for interior dash
 

Hey guys I am looking for a either white carbon finger vinyl or maybe a good white vinyl for the interior dash. Not the whole dash due to visability issues in the sun just the area around the radio and passenger airbag cover thing. I was even thinking maybe around the round vents and vent above radio. The other areas I was thinking was the silver part on the steering wheel and around the shifter along with on the interior door handle thing.

What company would you recommend getting this from and if you have any comments or advice I am open to anything. Learn from others mistakes and achievements :)

i used 3M 1080 vinyl in satin white pearl to do my dash, it was easy very to work with and no bubbles.

http://farm6.staticflickr.com/5533/9...da8f95b8_o.jpg
this is the difference between the stock silver and the satin pearl white.

http://farm6.staticflickr.com/5482/9...ed8e14e8_o.jpg

the final.
http://farm4.staticflickr.com/3713/9...72a82514_o.jpg

i tried searching but i cant seem to find out how to remove the silver interior panels.

Can any one point me in the way of the instructions or the process of removing them?

Any help would be greatly appreciated.
i just dont wanna break them by trying to figure out how to remove them.

just push out from the bottom of the panel, first the passenger.

I used a APA vinyl in carbon (normal) Is better that 3M becouse is more slim and you can mold better on the curves of the panel!!

my car is also white but I don't like the white inside the cabin, because of the reflections..