| AlexTheGreek |
07-05-2013 09:39 PM |
Quote:
Originally Posted by Burrcold
(Post 1047733)
Probably taking the actual different parts of the mirror apart (not just off the car).
|
Right you are!
First off, if you don't pivot the mirrors back you will break the plastic piece.
Second, you gotta get the harness connector apart to slide the wire through the seal. Use a very fine flat screw driver.
Third, you gotta gently pop the mirror glass off its four clips to disassemble the mirror housing.
All these steps are described in the service manual, but very prone to you breaking stuff. So be careful.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
|