Free BRZ/FRS dyno testing in Calgary.
 

Been doing this a while to get a local database of mods versus power on the same dyno with same operator. Results so far I posted here http://forums.beyond.ca/st2/scion-fr...=&pagenumber=1

So if you are local and wanna quick baseline to see what yours is putting down or before and after of your mod, id be happy to Squeeze you in. Honestly takes me about 15 minutes to do a few runs, so its no big deal.

The dyno is a 2006 model dynodynamics. Calgary is at about 3500 feet, all results are corrected unless you ask for otherwise. Runs are made in fifth (1 to 1) at a ramp rate of 125 with stock gearing (this is a DynoDynamics load setting, on a FRS this is an acceleration rate of about 450 rpm per second).