EasyGo system. Car remote starts then shuts off
 

Hey Guys,

So i got the EasyGo keyless system with push button and remote start.

I've wired everything correctly according to the DIY. The car remote starts, stays on for about 3 seconds, then turns off and attempts to start again 2 more times, not turning on during those attempts.

It doesn't seem to be the immobilizer bypass since the Push Start works fine without the factory key nearby.

Anyone with installing alarm/remote start experience have any ideas?

Thanks

Try another "brain"

I had the same exact problem. Mike @PrimeMotoring in NJ fixed it no problem. Try him for some advice.

Thanks for the referral, I sent him a PM. Hopefully he can help me out.