Vacuum help!
 

Just installing a turbo and i wanted to know where I can get the vacuum line for the wastegate , besides the PVC & Brake booster.

The compressor cover on the turbo.

There is a purge control valve port under the manifold but it's a pain to get to. Those lines really need to be clamped at high boost. Ask me how I know :)

You can't use the purge port however unless you let your purge valve vent to atmosphere. I ended up taping the manifold and installing a 1/8 npt nipple.

Thanks! If we run into any more problems today I'll let you guys know

I answered your PM this morning. Same answer as Element Tuning.

Yes, compressor cover for wastegate and intake manifold for BOV and or Hydra EMS MAP sensor.

Vacuum manifold FTW.