Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   DIY (Do-It-Yourself) Guides (https://www.ft86club.com/forums/forumdisplay.php?f=43)
-   -   DIY - EasyGo Push Start Button Install (FRS or BRZ Premium) (https://www.ft86club.com/forums/showthread.php?t=39313)

SPEEDGOD 02-27-2014 09:17 AM

Quote:

Originally Posted by Chaetagnath (Post 1559316)
They usually respond fairly well when contacted at this email address: info@easygosystem.com

I've been trying to reach them since October 2013 lol

Sent from my SM-N900W8 using Tapatalk

sero901 02-27-2014 05:52 PM

I have had poor customer support. I have talked to them once about the remote start not working (firmware which is still wrong in dec/13) and they said remove the box and send it back. as i dismantled my ignition and my car is my dd its not that easy to do. so now i have no remote start. unless i can track down a old box someone has that is willing to send in for me (i will pay$$) so i don't have to take my car down! i was told this is due to a short supply of boxes. I emailed them 3 times since to see if they had them in stock yet, even offered to pay. no replies

nunonuna 03-07-2014 10:43 AM

Quote:

Originally Posted by sero901 (Post 1562325)
I have had poor customer support. I have talked to them once about the remote start not working (firmware which is still wrong in dec/13) and they said remove the box and send it back. as i dismantled my ignition and my car is my dd its not that easy to do. so now i have no remote start. unless i can track down a old box someone has that is willing to send in for me (i will pay$$) so i don't have to take my car down! i was told this is due to a short supply of boxes. I emailed them 3 times since to see if they had them in stock yet, even offered to pay. no replies

Yeah, they used to reply me back next day I sent inquiry but since last fall, they haven't replied my last email yet. I don't know what happen with them.

Sent from my Galaxy Nexus using Tapatalk

jonzhuxD 03-25-2014 03:20 AM

So if I were to order the Easy-Go system tonight, should I assume that all issues are fine or will some things not work and support be unable to help? (Since they stopped replying)

Chaetagnath 03-25-2014 10:36 PM

Possibly the remote start might not work, as they had some firmware with it originally. Most likely everything else will work, but the trunk will require a relay to work properly (as described in an earlier post).

jonzhuxD 03-26-2014 12:12 AM

Anybody with a 6MT with remote start working?

Chaetagnath 03-26-2014 12:06 PM

Quote:

Originally Posted by jonzhuxD (Post 1626392)
Anybody with a 6MT with remote start working?

http://www.ft86club.com/forums/showp...6&postcount=57

nunonuna 03-31-2014 03:53 PM

Quote:

Originally Posted by jonzhuxD (Post 1626392)
Anybody with a 6MT with remote start working?

Mine works fine, but my brain unit was swapped with new firmware.
Im not sure if you will receive new updated unit or not.

Sent from my Galaxy Nexus using Tapatalk

upsidedown 05-21-2014 12:50 PM

is there an input for "Neutral Safety" for the EasyGO system? From the picture of the wiring diagram on the first post it doesn't look like it, but its hard to tell given the resolution.

I am debating between the EasyGo and Advanced Key. EasyGo seem to be cheaper and a one stop option, but it looks like the Advanced Key system has more 'safety' options built in.

sero901 05-22-2014 10:21 PM

Quote:

Originally Posted by upsidedown (Post 1751005)
is there an input for "Neutral Safety" for the EasyGO system? From the picture of the wiring diagram on the first post it doesn't look like it, but its hard to tell given the resolution.

I am debating between the EasyGo and Advanced Key. EasyGo seem to be cheaper and a one stop option, but it looks like the Advanced Key system has more 'safety' options built in.

If your referring to a neutral safety for the remote start then no. I bypassed the clutch switch and you need to remember to leave it in neutral if you plan on remote starting. Take note if you go with the EasyGo many users (me included) have been unable to get any tech support lately. Your box will most likely come with a few glitches that you may be stuck with if you cannot get ahold of them. Most Everything still works except the remote start as far as i know.

sero901 05-27-2014 11:35 AM

Update: so in a unfortunate turn of events my car is on and won't shut off! Gonna try some thing to get it to turn off now. This kit has been nothing but a nightmare since support stopped!

upsidedown 05-27-2014 11:49 AM

Quote:

Originally Posted by sero901 (Post 1754419)
If your referring to a neutral safety for the remote start then no. I bypassed the clutch switch and you need to remember to leave it in neutral if you plan on remote starting. Take note if you go with the EasyGo many users (me included) have been unable to get any tech support lately. Your box will most likely come with a few glitches that you may be stuck with if you cannot get ahold of them. Most Everything still works except the remote start as far as i know.

Thanks. I guess I'll wait and see if I can get a deal on the advanced key option.
I've left my car in gear a few times and i wouldnt want that happening when remote starting.:eyebulge:

also, all the recent news of their support (or lack of) is steering me away... I guess ill pay a little more for something with more support.

Chaetagnath 05-27-2014 02:33 PM

Quote:

Originally Posted by sero901 (Post 1761365)
Update: so in a unfortunate turn of events my car is on and won't shut off! Gonna try some thing to get it to turn off now. This kit has been nothing but a nightmare since support stopped!

I haven't had really any problems. You may want to try pulling the power from the box to reset it. Also, be sure all the connections are soldered, not tapped as eventually tapped connections will lose function.

Stormalong 05-27-2014 02:55 PM

Quote:

Originally Posted by sero901 (Post 1761365)
Update: so in a unfortunate turn of events my car is on and won't shut off! Gonna try some thing to get it to turn off now. This kit has been nothing but a nightmare since support stopped!

Same thing happened to me in Feb. I had no idea how to stop it, so I ended up taking it to the dealership (just around the corner fortunately) and the service guy managed to stop it by pulling a relay under the hood. After replacing the relay it started working again. He showed me which relay (just in case it happened again) but its been working fine ever since.


All times are GMT -4. The time now is 09:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.