Bump

what else would be needed for instal? I may have missed it, but engine management? Thanks.

You will need to acquire the tuning software, cable, license, and map yourself.

bump

Free bump

Thanks, if you're $500 short we can talk about working something out.

You have a PM sir

pm sent, serious inquiry


what happened to the frs, that's a lot of work to put the kit on then take it right off

still available?

The turbo kit is still available

It's pretty stupid that this is still available, this should have sold ages ago. Nothing's wrong with the kit guys, he's being honest. Don't see anything wrong with a brand new kit for a huge chunk off the price :iono:

This shouldn't last much longer so someone should jump on it before someone else realizes how good of a deal this is.

You spun a bearing? If it wasn't for that, I would've been more inclined to pull the trigger. Don't like the idea of metal flake in the oil going through the turbo =\

Glws though

The turbo was ran under boost with the spun bearing. It started knocking as we idled into the shop bay and was immediately shut off. Oil was drained and only a very very fine dust was in the oil. No larger chunks. Frs300 blew his motor with a catastrophic failure resulting in very large metal flakes and his turbo was fine upon inspection. My turbo was visually inspected and showed no signs of damage.

I'll jump on this kit if you'll include the clutch for $4000 shipped.

It's not exactly the kit optioned out how I would want, but I'll jump on it only if it's a smokin deal, otherwise I'm just going to buy new.