We are proud to finally release our V2 Single Exit Exhaust system for the Scion FR-S, Suabru BRZ, and Toyota GT86.

This is the review of this system and general information.

After a very long delay that seemed like forever we have finished our V2 exhaust. We had one goal in mind here really and that was to reduce the weight of the exhaust system. That was achieved here. :)

We used a V-Band clamp again to attach the axle back portion for ease of install, and backwards compatibility with our V1 system. So for those of you who own our V1, you can grab the V2 axle back and simply swap out for track days to loose some weight if you want, or just want to rock the single look for awhile. We use the exact same mid-pipe making this change possible.

If you are looking for something made in the USA, that's extremely high quality, super lightweight, and provides a great sound, then this is it.

Super lightweight. Muffler section weights in at 10 lbs exactly. Add in our mid pipe at 16lbs, entire systems is 26lbs.


V2 SPECS:
2.5" T304 Stainless Catback to Muffler
Minimal bends, Single Piece Mid-Pipe No pie cuts and welds here.
4" Stainless Angle Cut or Rolled tips
Made in the U.S.A (Iowa to be exact.)
V-Band Clamp for rear section
Un resonated or resonated options are available on this system
Extremely light weight
Fits both manual and automatic FRS / BRZ cars
Backwards compatible with the V1 system.

This system is on our Silver FR-S and will be at the 86Expo in Las Vegas. Come by and check it out.

Picture time.

Resonated:
http://ft86speedfactory.com/images/SingleV2.JPG

Non Resonated:

http://ft86speedfactory.com/images/V2SingleNR.JPG

Standard Pics:

http://ft86speedfactory.com/images/SingleV2-10.JPG

http://ft86speedfactory.com/images/SingleV2-11.JPG

http://ft86speedfactory.com/images/SingleV2-2.JPG

On Car:

http://ft86speedfactory.com/images/saltflatsjb.jpg

http://ft86speedfactory.com/images/SingleV2-19.JPG

http://ft86speedfactory.com/images/SingleV2-12.JPG

http://ft86speedfactory.com/images/SingleV2-13.JPG

http://ft86speedfactory.com/images/SingleV2-14.JPG

http://ft86speedfactory.com/images/SingleV2-15.JPG

http://ft86speedfactory.com/images/SingleV2-16.JPG

http://ft86speedfactory.com/images/SingleV2-17.JPG

http://ft86speedfactory.com/images/SingleV2-18.JPG


Videos contain the following exhaust mods:
Borla UEL
Motiv Over Pipe
Invidia Resonated Front Pipe
FT-86 SpeedFactory V2 Exhaust ( Single Exit )


Rev Video - Resonated Version:
[ame="http://www.youtube.com/watch?v=3x6-lBPjSjY"]FT-86 SpeedFactory V2 Exhaust - Single Exit - Scion FR-S and Subaru BRZ - YouTube[/ame]


Drive By - Resonated Version:
[ame="http://www.youtube.com/watch?v=3D9KmIF8boQ"]FT-86 SpeedFactory V2 Drive By Videos - YouTube[/ame]

More videos and dyno's after we get back from 86Expo in Las Vegas.

Drive By on the Salt Flats - Resonated Version:
[ame="http://www.youtube.com/watch?v=4BI7F4VA7n8"]FT-86 SpeedFactory V2 Exhaust Fly By - Salt Flats - YouTube[/ame]

Originally Posted by euroshowoff (Post 994409) Two things... 1. I love you guys no homo...lol. Anytime I have a question on something or a product I can just do a thread search for your username and find fantastic reviews and pictures. Thumbs up on that 2. You don't see any issues from going with. 2.5" overpipe -> 2.36" front pipe -> 2.5" catback? Keep up the awesome work and no doubt when it comes time to dump cash into mine I'm getting straight from FT86speedfactory :thumbsup:

Originally Posted by rupert (Post 995797) I don't think anyone has suggested it yet in this thread, but a cover for the other side of the bumper would be amazing :D Do you know of anyone you could work with to fabricate something like that?

Originally Posted by FT-86 SpeedFactory (Post 995947) We have been working with someone for that. ETA is unknown right now on it though.

Originally Posted by jonbonazza (Post 996504) This is the biggest thing for me! After ordering this exhaust, I have been looking around for a replacement rear valence, but no go. :/ Also, just noticed that your bends don't look mandrel-bent. Wouldn't this exhaust be even better with mandrel-bent pipe?

Originally Posted by FT-86 SpeedFactory (Post 996559) Our exhaust is mandrel bent for sure.

Originally Posted by wgnzlz (Post 996573) Sounds awesome but maybe a little loud for DD use.