Visconti STG1+ kit not shipping with smaller pully.
 

Nothing to see here, move along.

Didn't he say it was supposed to be in the kit from Vortech to someone who inquired about this last month? Or am I thinking of something else?

Sent from my Nexus 4 using Tapatalk 2

The stage 1 kit is the 9psi pulley as far as vortech is concerned.

STG1+ from visconti was packaged with a smaller pully.
Well advertised with a smaller pully.

Paging @kaybee123 and @congiiee - you guys received the smaller pulleys with your Stage 1+ kit, could you confirm if they came from Visconti directly or were they part of the package from Vortech?

Actually, looks like @charged86 has a picture of his pulley on his build thread and it arrived in a Vortech box, but he did order from a different vendor I believe, although they were reselling Visconti's kit I think.

http://www.ft86club.com/forums/showp...75&postcount=1

I would submit that you'll need to contact your vendor (Visconti in this situation) even if the problem is on the Vortech side, since he's the one with the relationship with them and they'll likely refer you back to him anyway.

I am not sure how I got dragged into this, Visconti told me it was on back order and give him two weeks. It has been about 18 days now. I sent Rich a PM today and waiting a response. Give him a chance to reply, patience is a virtue! If I find anything out I will let you know.

I actually don't know, I haven't opened everything up yet.

It certainly hasn't come in the Visconti packaging. (There was just the ECU / Map Bar / Injectors) however I definitely DID order one in the package listed.


Edit: Didn't receive the pulley either :|