JPM Alcantara Covered Steering Wheel
 

Installed last night. I think it's a work of art, beautiful, Expensive, but good value IMO.

Really comfy, and I like comfy :)

While waiting for this wheel, I drove around with a Momo and the Traction/Airbag idiots lights on for the last few months. After I re-installed the original wheel, the traction and airbag lights stayed on. Also the horn and cruise control, doesn't work....anyone have some advice on this?!??

I uninstalled and checked all the connectors inside the wheel, all ok.

http://i38.photobucket.com/albums/e1...psd42b5141.jpg

I'd say give it some time or give resting your ecu a shot

Double check the airbag connection.

Locked
http://i352.photobucket.com/albums/r...0a09541677.jpg


Unlocked
http://i352.photobucket.com/albums/r...60da4aa9da.jpg

Pics are from my STi

thanks! I did this when I took it out and was very careful to lock it.

stranger that the horn and cruise control also not working.....?

Sounds like ur missing a ground but try resetting the ecu first. That will at least take care of the air bag light. Always try the easy stuff first lol. Horn and cruise usually piggy back grounds.

did you connect all 3 connectors?

sexy

Looks great post back on how the Alacantara holds up to sweat. My race wheel got ruined pretty quick when I was not using gloves.

Thanks, I tried this, no change.


will check this out, might be the ground behind the rotating contacts


yes, twice

yes!

intertesting

Attachment 39121

Installing mine tomorrow! Can't wait ><

very nice :)

be careful! looks like I damaged my steering angle sensor, the shiny black round plastic behind the wheel. supposedly you should not spin this thing around or it will get out of sync.....still researching this.