| Beyer Subaru |
05-24-2013 02:52 PM |
Quote:
Originally Posted by mezdup
(Post 957567)
@ Beyer Subaru nice find. looks like it should fit the FR-S as well. just so i understand correctly. the ring is on all the time and acts as a DRL? and then when you turn on the fogs, the ring will turn off and the halogen bulb will turn on. is that correct?
also can you take a couple of shots of the whole front with the DRLs/fogs on?
|
The kit is supposed to be wired as DRL LED and normal Fogs. Meaning that the LED Ring will be lit as a DRL. The Fogs will be on or off as the Headlights are on/off. Being DRL's the ring will go out when the heads come on.
Quote:
Originally Posted by BRZNutt
(Post 957583)
Not my cup of tea, but nice find on the H11 adapter. I would have used that instead of the adapter cable I purchased when I did my fog light swap. Also where is the led ring getting its power from?
|
The LED Ring is powered as a DRL with it's own wiring, harnesses and relays etc. The harness is identical to our (BRZ) existing DRL's.
Quote:
Originally Posted by mit_peid
(Post 957678)
This. If the ring stays on acting as DRL, where does it get power from (seems like it will need to get tied into the OEM DRL circuitry - or a relay tied to ACC and an external switch?). I hope I can make something like this work on the FRS because that ring looks dope. You BRZ guys have that cool-ass DRL too, but I gave up on that a while back.
|
Yes, it has all of it's own independant wiring for the DRL's. The Fogs however have no extra wiring. Meaning it will be plug and play for the Fogs if you have existing Fogs or the car is pre-wired for Fogs.
Quote:
Originally Posted by mit_peid
(Post 957690)
Holy crap!
|
Your damn skippy. JDM fairy dust is very expensive these days. |
