NEW PICS! Mid Atlantic Red-Out and Tinting For Your Tail Lights, Signals, Etc.@Pure
 

http://i1273.photobucket.com/albums/...ps4a492c2a.jpg

I've seen a lot of interest in this and I know some people were even sending them to California to get done. I have a local friend/customer that does incredible work and I'll be offering Red Out and Tint Services from him!

This will be done with high quality candy colors and professional grade paints and clear coats!

Turn Around is usually 2 business days!

Sorry For the Rainy Pics! Pictures don't do them justice, I assure you they look OEM quality in person!

http://i1273.photobucket.com/albums/...psdabf9a98.jpg
http://i1273.photobucket.com/albums/...pse035db04.jpg

Available Services:

Tail Light Red Out $99 Per Pair

Tail Light Black Out (Tint) $99 Per Pair

Tail Light Red Out With Clear Window For Signal $120

Tinted Front Turn Signals $49 Per Pair

Tinted Front Side Markers $49 Per Pair

This is for local customers only! No shipping!

:thanks::thanks::thanks:

>:] Oh yesss

I need to get a new drivers side tail light but, after I do, I'll stop by for a tint.

oh nice, definitely interested

I haven't used Pure Automotive's guy, but I highly recommend you guys do this! I can't stop looking at mine, the car really should have come this way from the factory (and with a good paint job, they will look like they did).

http://i.imgur.com/LhDDfG3.jpg

http://i.imgur.com/PkTjRzw.jpg

Is it possible to get the tails done in less than 2 days since ill need my car and im sure the police wont like me driving with no tails

It might be a smart business move for @Pure Automotive to pick up a set of 86 tails (either used or new) to have as a core swap program.

If you want your tail lights pulled and switched for loaners I can do it for an additional labor fee. Otherwise, bring me the tail lights or bring some tools and switch them when you're dropping off. I'll work on getting a loaner set :)

your tail lights look great:respekt:

Welp... I guess I shouldn't be too surprised if my turbo car is missing tail lights...

Lol nice

Good move pursing the loaner set. I think that'll help a lot of people get off the fence.

For those concerned about removing/replacing the lights, it's a dead simple job. Deep well 8mm socket, 4 bolts per taillight, and a small pick or jewelers screwdriver to remove the wire harness clips.

I would also recommend contacting @wdninja for some taillight gaskets to install when you swap the lights to help mitigate any potential condensation issues. Maybe @Pure Automotive could even start stocking those gaskets.

Seriously interested! Can you give us an idea of how the masking will look for the turn signal window? I think that would look more OEM but would prefer to see an example before committing.

Have to get rid of these altezzas! They make the car look cartoonish.

I believe I saw an example on here earlier, let me see if I can find it again.

Here ya go: http://www.ft86club.com/forums/showthread.php?t=34485

Really like that look.