Anyone with an AT turbo?
 

Has anyone here installed a turbo on their AT and found any issues with it? Blown torque converter? Messed up transmission? Thanks.

@BRZranger

@FA20Club.com

Full blown has an auto on E85 pushing over 400whp.

no blown torque converter, jacked up transmission, or any issues at all as of yet,

push 11 psi through it via an AVO kit. around 15k total miles or so.

will advise once i'm at 16 psi.

any shops pushing boost through A/T's please chime in as well, would love to know what the community is doing to help sustain and maintain the trans. :thumbsup:

i have an auto FRS. running a little over 7 PSI. not a single issue, running the AVO stage 1.5 i believe bob from drift office did a couple auto brz's

Stage 1.5 AT correct. BRZRanger is too, but we're waiting on some new stuff for him. :)


Bob @ Drift-Office, LLC

I didn't remember you were auto!!

Fuel pump holding good??

holding good and rich for now, got my 8psi actuator on order, and working on looking for upgrades for AT reliability. (if nothing is going wrong, the only thing that can happen is bad, which must be prevented at all costs, lol.)

P&L pushed it over 17psi on their auto. Paul was saying that the torque converter lags at that boost.

Our's is still running strong. Even though a girl owns it, she's not the typical girl who babies her car.

any particulars on what she's pushing, and has modified ?

not trying to peep under someone's hood without asking, but its for the community.

300hp 9-10 psi 93 octane with our stage 1 kit.