25mm conversion spacer with 5mm spacer = safe or unsafe?
 

I'm in a dilemma... Trying to run 30mm spacers in the rear with 12X1.25 hubcentric PCD conversion spacer in 25mm. If I had a 5mm spacer, can I add it to the conversion ontop of the spacer or on the hub first then the conversion spacer?

Anyone have experience with this and it's safety? Any help would be great!

I'd go with the 25 but the fitment with 30 is definitely better

Depends but I ran this kind of set up on my old car for about 30k miles and nothing bad came of it. I used Parts Shop Max spacers which are made for this exact thing. I would give them a look.