Turbo Problems please help
 

Hey guys

So i have a FBM base kit installed on my frs

I was away for 9 days and today i took it out and my clutch felt really weird.
It felt like it has no play at all and really stiff.
Worse part is that when i was goin into boost (4k rpm) the car didnt wanna go .
It stopped and the rpm when all the way down and then it went again.

My AFR was like 8.2 which is really rich.

What can be cAusing the problems?
Can i blow my engine because of this?

Not enough info to determine what is happening but I would recommend you stop driving it until you are able to diagnose the issue.

I need to get it to The shop which is 1.5 hrs away

Just stay out of boost when you drive there and you'll be okay.

Tow it because if your motor pops or what ever I rather pay a tow truck than a new motor IMO

but ya need a little more information

Just thinking outloud here... Can you fully open your wastegate, go back to a safe baseline tune, then drive it to the shop without boost?

lets say im driving and then when i hit boost the car slows down and looses all the power.

im not sure how to explain it

oh boy, call dan asap! i got his cell if you need it..

spoke to him but need to drop off the car and I'm way too far lol

Air fuel ration problem..

dont have an ecutek cable

Have you checked all the hoses to make sure there is no leak?

Sounds like a classic boost leak. You are probably leaking metered air causing a rich afr.

Don't know about the clutch issue...

i wonder if i can drive my car to the shop whick is 80 miles away