PTUNING FR-S/BRZ Turbo Testing @ VMP 4/21/2013
 

[ame="http://www.youtube.com/watch?feature=player_embedded&v=FZnlg7XK7kM"]PTUNING Turbo FR-S @ NASA VMP AutoX on 2013-04-21 - YouTube[/ame]

Thanks to NASA Racing Organization for helping us put this event together.
The Turbo System Performed flawlessly along with our PnP Water/Methanol Injection System

Looks good. Are those the SBC RPF1s?

Suspension looks a little...underdamped? Looked awfully bouncy.

Love the turbo kit. Whenever my warranty is up I'll probably make the jump to it. Do you think something like the GT2871 would ultimately be better for autocross or does the GT30 have enough grunt right now?

That is correct they are SBC RPF1's.

The suspension is Stock except for some lowering springs as our Ohlin Setup did not arrive in Time. Both Turbos will work just fine but the GT30 does not have any issues spooling up and the power delivery is there even for low speed events like autocrossing

https://sphotos-a.xx.fbcdn.net/hphot...77986415_n.jpg

Ohlins coil-overs, ARP extended wheel studs and Stop Tech front/rear big brake kit on the PTUNING Turbo FR-S.

Ohlins!!

Rematch? Hehe

When our Turbo Kit is done we will try to host a Course/FATT or Learning experience at Summit Point. Will have plenty of heads up when we try to do that, this event was fun and it can only get better with time and a better track (Also Turbo, Suspension, Brakes will be all done) :party0030::burnrubber:

What class would you fall in for SCCA purposes?

It would most likely be the modified category

what brake sizes are you using?

stoptech BBK 355mm front, 345mm rear w/ 18" wheels


MrC

How is the braking balance? Is it similar to stock or better?

Excellent so far on the street and autox. But will be testing it on a road course this spring.