Originally Posted by becauseracecar1 (Post 1694571)

Do you have any pics of the j hooks installed? I'm having a hard time with them. Thanks!!


Sent from my iPhone using Tapatalk

Originally Posted by daiheadjai (Post 1695544)

I'll see what I can do!

Will have to be later tonight!

Originally Posted by daiheadjai (Post 1696304)

Here's what mine looks like.

Basically, each clip uses 2 screws:



Image 1 & 2:

The first screw holds the clip on your bumper (you can use a screwdriver to drive it in, but be careful of the placement), and passes the big hole through to the small hole (which is the side that will actually hold the clip to the bumper)



In the first 2 pics, you can see the back of the clip (which faces the rear of the car), where it is screwed into the soft black plastic of the rear bumper.



Attachment 76134

Attachment 76135







Image 3

The second screw is put in after you pull the diffuser edge over the long end of the clip (the diffuser tip has a little ridge that should slide right over the bracket/clip)



Attachment 76136



Image 4 & 5

These 2 pics give you and idea of the locations of the 2 screws



Attachment 76137

Attachment 76138



It should look something like this (pardon the crappy MS paint):

Attachment 76142