Wheel Directory: ProDrive GC-010E 18x7.5 +48
 

http://www.darrendriven.com/ft86/title.png


.


What kind of wheels are these?




http://cdn.mkimg.carview.co.jp/minka...3413364/p3.jpg

:thanks:

Looks like Prodrive gc-010g

Actually maybe the E variant

That wheel is only available in one size 5x100, so jumping to that conclusion.
http://www.prodrive-japan.com/produc...rged/size.html

ProDrive GC-010E 17x8.5 +30

(kinda looks like an 18" wheel to me, though)

Added to the Wheel Directory:
http://tinyurl.com/86wheels

You were looking under the "For European" tab on that site. If you click on "For Japanese" you will see they have [if I'm transcribing it correctly] 17x7.5 +38 or +48 or +47, 18x7.5 +48, and 18x8 +43 all in 5x100.

Yet another set of gorgeous Prodrive wheels.

They could be Prodrives or Rotas. Judging by the TRD kit though I would assume that they are Prodrives.

Thanks! I didn't see that.

For the sake of labeling this topic in the Wheel Directory, I am going to call these 18x7.5 +48. I'm not subscribed to this topic, so if anyone learns it is another size then please PM me.

any more images of the car with these wheels on it? prease?

Perhaps the website has been updated since the above posts were made as now, even under the Jap section, the wheels are only available in 17".

Would anybody else be interested in them as 18" if I were to contact Prodrive to establish whether they would possibly make them?

Bringing this thread back from the dead. These wheels are impossible to find in the US, but I got lucky and bought a set from someone who imported these used from Japan.

Here they are on 225/40/18 tires. Dropped about 1 inch on coilovers, no camber adjustment. About 3 pounds lighter than the stock 17" wheel. Just love them!

What is the offset of these wheels? The rear seems a bit inside the wheel arch or is it the photo?

The car looks like it's supporting pop up lights... nice wheels BTW.

The offset is 48. The wheel is tucked in quite a bit because of 2 degrees of camber and the wheel is only 7.5 inches wide. This could be fixed with spacers or correcting the camber, but I haven't bothered.