FRS / BRZ Sub Box Prototype - Need Volunteer for Quick Test Fit and Pics
 

Hi all, My name is Dan and I am the Owner / Operator of Integrity Concepts a new FT86club official vendor that is located in the NW Region, Lynnwood, WA. to be exact. We are Prototyping a few vehicle specific fiberglass subwoofer boxes for the 2013 Scion FRS / BRZ. More info about our build can be found here:

http://www.ft86club.com/forums/showthread.php?t=31813

I need to ask a favor from one of you. Our donor vehicle for this project is currently out of town, and we are at a point in the process where we need to test fit our 4 prototypes before we proceed into making the production molds. They do not need to be mounted, just set in the corners of the trunk, this will take 5 to 10 min tops, and will not cause any damage or dirt whatsoever. we would like to take a few pics and check our carpet sample for a match with the factory trunkliner, so a clean trunk would be preferred. I can meet you anywhere in the North King or Snohomish County area. ASAP would be best. Let me know, and thanks for the help guys.

P.S. When the final product is nearing completion we will try to make it out to a few area meets so you NW guys can get a first look.

I would but I'm on Spokane... Sucks that no vendors are over here.

I would make the drive but i already have a custom fiberglass box in one of my corners and the amp rack in the other. Sorry!!!

https://dl.dropboxusercontent.com/u/...3/DSC_0444.JPG

https://dl.dropboxusercontent.com/u/...3/DSC_0445.JPG

I live in Tacoma but would be willing to meet somewhere in the middle? Shoot me a PM I'm available today up until about 7 if you'd like.

PM'd

This is great, thanks.

By chance is there anyone in the North end? Hoping to avoid taking too much of anyones time, traffic could be quite a pain.

Bellevue here. Don't mind the drive but I will not be able to meet until Friday after work :(

Let me know if you still need me on Friday.

I live in Everett and could probably make it Friday after work 4 or 5pm

I work in Lynnwood/Everett area. You could just come by my work or I could come by your shop whenever.

Let me know.

Thank you to all who offered their time and vehicle for this test fit, we got this taken care of now, and got some good pics. A Pre order sale for our 10" passenger side enclosure should be up later today.

We want to sincerely apologize for our lack of communication over the last few weeks. We are currently moving our shop and it has cut into production more than we anticipated. We hope to be back to full function by the end of next week. I will update on the progress of our enclosures as soon as I get everything unpacked and am able to make an accurate assessment.