Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)

- - Fog lights installed on FRS (https://www.ft86club.com/forums/showthread.php?t=33159)

Fog lights installed on FRS

Finally had time to install my fog lights in after the bezel and harness came in from nigel last week.

Didn't have a dremel, but with a drill, a mini hacksaw, and elmers glue, you can make a switch happen.

Will probably change those green LED's in the switch to red ones just so they match the rest of the car.

Thanks to Juanito for the DIY and Nigel for the quality parts and free LED which I jury rigged into my existing LED dome light.

Here are some pics. I will post some more pics with the lights on tonight when its darker.

http://i99.photobucket.com/albums/l3...psf6b01421.jpg

http://i99.photobucket.com/albums/l3...psadd48888.jpg

**EDIT**
More Photos

The fogs have H11 LED's from eBay if anyone is wondering.

http://i99.photobucket.com/albums/l3...ps2e99e646.jpg

http://i99.photobucket.com/albums/l3...psb3c9217c.jpg

http://i99.photobucket.com/albums/l3...psdb05b35f.jpg

http://i99.photobucket.com/albums/l3...psc01d3260.jpg

The lights look good, but the factory foglight stalk would look much nicer than that switch. If you somehow managed to flush-mount it like the trunk release it'd look ok though.

Quote:

Originally Posted by Subie (Post 851378)

The lights look good, but the factory foglight stalk would look much nicer than that switch. If you somehow managed to flush-mount it like the trunk release it'd look ok though.

I was thinking the same thing but that was the switch I got with the harness and I didn't want a rocker switch from autozone. I'll see if I can do something to make that switch flush mounted, I don't like how it sticks out either.