★★★ Gauging interest WORK wheels group buy !! ★★★
 

What do YOU! want for a group buy on WORK WHEELS! ( be different! )

From what I see there are a lot of RPF1's and such

THMotorsports is a authorized dealer for WORK wheels!

We would like to do a group buy on ONE TYPE of wheel in WHAT SIZING YOU GUYS WANT! we can do any combination no restrictions

17/17
17/18
18/19

Tell me what you guys want and lets make it happen! I will post the sizing charts and we can do a CUSTOM PCD for 5x100

Finishes you are looking at the cheapest is bronze and the most expensive is WMB ( Work metal buff) This is like SBC chrome looking!

Copy and paste the format

Wheel type:
Size:
Width:
Offset:
Finish:


Work XT7

http://www.workwheelsusa.com/media/w...wheelImage.png

Emotion XT7 is a one piece low pressure cast aluminum wheel. The bold 7 spokes design charactorize strength and durability. Wide range of sizes and offset. Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, XT7 is available with flat face, semi-concave or deep concave face. Some specs are BBK friendly.

CLICK FOR SIZE CHART

http://www.workwheelsusa.com/media/w...8/XT7_2013.pdf


Work XD9

http://www.workwheelsusa.com/media/w...wheelImage.png

Emotion XD9 is one of our most popular Emotion series wheels. XD9 is made of one piece low pressure cast aluminum. Aggressive 9 spokes styling with huge rim flange (Lip). Popular with most rear wheel drive cars, but application is also available for front wheel drive and all wheel drive vehicles.

CLICK FOR SIZE CHART

http://www.workwheelsusa.com/media/w...XD9%20Spec.pdf


Work 11R

http://www.workwheelsusa.com/media/w...wheelImage.png

Emotion 11R is the latest offering in the Emotion series. It is a one-piece low pressure cast aluminum wheel with a wide range of sizes and offset. Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, the Emotion 11R is available with semi-concave or deep concave face. Some specs are BBK friendly.

CLICK FOR SIZE CHART

http://www.workwheelsusa.com/media/w...R_SPEC10A1.pdf


WORK CR ULTIMATE (Kiwami super concave)


http://www.workwheelsusa.com/media/w...wheelImage.png


The WORK Emotion CR Ultimate ("Kiwami") is the latest addition to the WORK Emotion lineup. Inspired by the classic Emotion CR design, it utilizes the latest in WORK Flowforming Technology (WFT) for a lighter and stronger wheel.

The wheel comes in a myriad of finishes, including Matte Bronze (AHG), Matte Black (MBL), White (WHT), GT Silver (GTS), and WORK Metal Buff (WMB). Sizing ranges from 15" up through a newly released 19". In addition, wider 10.5" and 11.0" options are available in 18"/19", featuring the new Ultra Deep Concave Face.

This WORK Emotion CR Ultimate utlizes WORK Flowforming Technology, also known as spun forming here in the U.S.

The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The CR Ultimate is a good choice for motorsports racing use and/or general street use.

Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting.

Low-pressure cast construction has a denser material property over gravity cast wheels, thus allowing a greater strength advantage over gravity cast with flow-forming barrel.

Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, the Emotion CR Ultimate is available with flat face, semi-concave, deep concave face, or recently added ULTRA deep concave face. Some specs are BBK friendly.

CLICK FOR SIZE CHART

http://www.workwheelsusa.com/media/w...LT_2013_v1.pdf


Remember if the sizing chart says 5x113.3 we can get custom PCD per wheel is $60. Litterally we can get any size on the chart in 5x100!!!

Lets get this going be different! These wheels are light and look great and agreessive!



Some pics

http://cdn2.bigcommerce.com/server28...17.600.400.jpg


http://24.media.tumblr.com/tumblr_me...t1qfo1_500.jpg

http://i679.photobucket.com/albums/v...PoomeFRS_5.jpg




Give me a call 1-800-959-0145 ext 102 Ask for Alan
Email - Acastro@thmotorsports.com
AIM - AlancTHM

I would be interested in the CR ultimate in a 18x8.5 in matte black. Dont know about which offset though. Probably will only lower the car about an inch, if I do the suspension. Any help with figuring the offset?

PM price to 94583 without a group buy please. Spot on for the wheel I am looking for.

sent from a Galaxy SIII...

Exactly what Overland'n'5thGEN said. Need to know pricing though!! And could be down for bronze.. Still have not seen bronze in person so I think black would be safer..

Pricing will be available when I know what everyone wants. Like I said for custom PCD its 60 EXTRA PER WHEEL

Wheel type: XT7
Size: 17
Width: 8
Offset: 32 or 42
Finish: Matte Grey Silver

Ok Definitely interested so I will put my name down, but I am only in if the price is right of course. Otherwise I will have to wait and get them way down the line.

Wheel Type: CR Ultimate
Size: 18x8.5 (Square set up)
Offset: +47 (might change as I learn more about offsets for these cars. Want a little tuck once lowered about an inch)
Color: Matte Black

Would it be possible to include the weight on each wheel?

17x9 +38-42

I think any of those wheels posted I'd be interested. Not sure I need another set but if those specs were picked I'd be really tempted.

EDIT: I guess based on the size chart that would include only the kiwami. Please excuse my ignorance I'm drinking ^_^

Wheel Type: CR Ultimate or 11R (would rather CR Ultimate)
Size: 18x8.5
Offset: Almost any just want concave (not a flat face)
Color: Matte Black