Plasti-Dipped Wheels
 

I hated the original 2 tone wheels, one of the first things I wanted to do was make them solid black.

Pics:

First day: It was snowing/sleeting
http://i.imgur.com/y5J6GHo.jpg

After detail:
http://i.imgur.com/bYVS1OG.jpg

http://i.imgur.com/zMcZd0m.jpg

Plasti-Dip: (it's raining today)

http://i.imgur.com/LPTNsfC.jpg

http://i.imgur.com/W1JG1Gm.jpg

http://i.imgur.com/00Y6EmK.jpg

Retook some photos with my camera when the sun came out:

http://i.imgur.com/Mp0K716.jpg

http://i.imgur.com/xxt26f5.jpg

http://i.imgur.com/W43vQbc.jpg

http://i.imgur.com/098MvAE.jpg

I like the white car with black accents look. I think I'm going to dip my chrome fender trim too.

Great job man. This is only helping me more to stick with the stock wheels and plasti dip them instead. Doesn't hurt that I will save around $1,000 too :D. Did you go with a glossy black or matte? It looks matte but I can't tell for certain. Also, did you get the entire wheel kit from dipyourcar.com that includes the pre-dip spray and brake masking bags? I like it a lot!

I went to home depot and bought whatever black multi purpose plasti dip they had. Used about a can and a half for 5 coats. I made sure to clean the wheels thoroughly beforehand.

I was looking at getting new wheels too until I saw what dipped wheels looked like. The problem with the stock is more the 2 tone than anything else. More offset would be nice, I think you can get plates for that?

Wait what?! That is all you need? The pre dip spray and all that is unnecessary?

I have no idea how long this will hold up. It's easy to just do it again. Takes 2 hours

Love the look with the black wheels!

So much you can do with plastidip and all I see in this forum is black. C'mon guys, get creative! :)

Black is better with white than orange is =P if I had another color I wouldn't have gone black

That's not orange though, that's gold/bronze. ;)

I'm colorblind, hence why black and white color schemes work well for me.

I did mine in december, and its still holding up like the day I did them

Nice! Is this black base with Gold metalizer?

3 coats of black, 3 coats of gold, 2 coats of copper.

Did you flip the wheels over and do the inner section or just spray the face of the wheel?

I did not flip them over, but sprayed through to coat the inside