Intake/Oil Cooler compatibility test
 

Hey everyone, I was thinking that it would be good for us to make a thread showing which intakes/oil coolers are compatible.

So far I have only tried the Greddy/AFE intake with the Perrin Oil cooler kit, and they are not compatible.

Couldn't route the lines under/around the headlight area? Or sandwich plate with lines couldn't clear the box?

The FA20CLUB intake would fix the issue with the lines at the sandwich plate.. that's what I'm using, custom cooler setup though.

There wasn't enough room between the oil filler and the airbox for the lines/fittings to come off of the sandwich plate. After looking at the air raid intake and the TRD one, I think I wouldn't be able to use those either.

Anyone try an oil cooler with the AEM/Injen intake?

The FA20 Club one and also the Perrin one look to have no issues, as well as the stock airbox and the vortech airbox.

Injen intake will NOT fit the Perrin oil cooler. Like I posted somewhere a while ago, your best bet would be to get a cold air intake so you wont have that obnoxious heatshield box.