|
Misc DIY parts / tool spec and references
This DIY list is intended to gather all the miscellaneous parts / tool that we used for our projects. By having a compilation of the relevant parts and spec list, it should help others to source their parts in the future.
Please use the following format to make the future search effort easier. Application: (the usage application) Name: (name of the product) Spec: (the specification of product, size, length, material etc) Source: (where to buy it from, link seller website if possible) PN: (part number) Price: (price of parts reference) Pic: (picture if available) Comments: (all other relevant info goes here, thoughts, review, credit, etc) |
Application: Clutch Slave Cylinder Bleeding
Name: Speed Bleeder Spec: Thd Size (M7 X 1.0); Overall Length, in/(mm) 1.19/ (30.22) Source: http://www.speedbleeder.com PN: SB7100S Price: $7.00 + shipping Pic: see website Comments: the S behind the PN SB7100S stands for short. You may use the standard length PN SB7100 which are 1.38” overall length for this application. Stainless Steel valve is also available with PN SB7100S-SS |
Application: Brake Caliper Bleeding
Name: Speed Bleeder Spec: Thd Size (M10 X 1.0); Overall Length, in/(mm) 1.35/ (34.44) Source: http://www.speedbleeder.com PN: SB1010 Price: $7.00 + shipping Pic: see website Comments: Stainless Steel valve is also available with PN SB1010-SS. Info from F1pont4 SS brake line DIY http://www.ft86club.com/forums/showthread.php?t=20311 |
Application: Clutch master cylinder hardline fitting size
Name: AN union / AN fitting Spec: AN -3, male Source: any, ebay PN: N/A Price: N/A Pic: http://static.speedwaymotors.com/RS/...R_17ecb16a.jpg Comments: this is a common fitting size, select the other side of this fitting depends on the matting stainless steel line you want to use. For example, if you select an AN -4 SS line, then you will get a AN3 male to AN4 male union. |
Application: Clutch hardline to soft line fitting size
Name: AN union / AN fitting Spec: M10 x 1.0 thread, male Source: any, ebay PN: N/A Price: N/A Pic: N/A Comments: M10 is also a common size to see on the AN fitting. For example, you can get an AN-3 to M10x1.0 fitting from ebay for $6. Select the other end of the fitting based on the SS line size you needed. For example you can replace your clutch hardline with AN -3 to AN -3 union + AN -3 SS line 6”-9” + AN-3 to M10 x 1.0 fitting. |
| All times are GMT -4. The time now is 03:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.