Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   AUSTRALIA (https://www.ft86club.com/forums/forumdisplay.php?f=20)
-   -   Brisbane drivers with 11cm ground clearance? (https://www.ft86club.com/forums/showthread.php?t=30786)

JasonCDC 03-11-2013 03:53 AM
Brisbane drivers with 11cm ground clearance?
 
Just wondering if anyone in brisbane has ground clearance of 11cm,from floor to side skirt. Hows the driving and the speed bumps?

Nardi330 03-11-2013 06:42 AM
No issue here so far.

Kenno 03-12-2013 03:00 AM
Fulcrum set my monoflex coil-overs up. It sits at the lowest legal ride height with 100mm clearance. No issues so far. And just be aware that Fulcrum found the lowest point of our car to actually be a part of the exhaust, not the body work. Just keep this in mind when lowering so you don't have any issues with the police.

JDMSushi 03-13-2013 05:22 AM
Quote:
Originally Posted by Kenno (Post 787865)
Fulcrum set my monoflex coil-overs up. It sits at the lowest legal ride height with 100mm clearance. No issues so far. And just be aware that Fulcrum found the lowest point of our car to actually be a part of the exhaust, not the body work. Just keep this in mind when lowering so you don't have any issues with the police.
Nice info. Which part? Im assuming that section over the back axle which flattens out and bends down.

JasonCDC 03-13-2013 12:25 PM
Thats good to know,planning on some 19's and gotta lower it for it to look normal.

omgwtfbbqsauce 03-14-2013 02:17 AM
Quote:
Originally Posted by Kenno (Post 787865)
Fulcrum set my monoflex coil-overs up. It sits at the lowest legal ride height with 100mm clearance. No issues so far. And just be aware that Fulcrum found the lowest point of our car to actually be a part of the exhaust, not the body work. Just keep this in mind when lowering so you don't have any issues with the police.
Sorry off topic but can you tell me how your monoflex compares to stock ride? PM me please :)

fuddbutter 03-14-2013 05:58 PM
Quote:
Originally Posted by Kenno (Post 787865)
Fulcrum set my monoflex coil-overs up. It sits at the lowest legal ride height with 100mm clearance. No issues so far. And just be aware that Fulcrum found the lowest point of our car to actually be a part of the exhaust, not the body work. Just keep this in mind when lowering so you don't have any issues with the police.

My Tanabe sits slightly higher up than the stock exhaust.. so i would be able to get it lower haha..

Kenno 03-15-2013 04:25 AM
Quote:
Originally Posted by JDMSushi (Post 790258)
Nice info. Which part? Im assuming that section over the back axle which flattens out and bends down.
Oh god, it was 8 months ago. But I believe it was that same section they informed me of.


All times are GMT -4. The time now is 04:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.