Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Suspension | Chassis | Brakes -- Sponsored by 949 Racing (https://www.ft86club.com/forums/forumdisplay.php?f=59)
-   -   Anatomy of the no-lift camber plates (https://www.ft86club.com/forums/showthread.php?t=29457)

Turn in Concepts 02-20-2013 05:58 PM
Anatomy of the no-lift camber plates
 
A picture is worth a thousand words....

https://lh4.googleusercontent.com/-Q...0/GTP_6101.JPG
https://lh3.googleusercontent.com/-4...0/GTP_6104.JPG
https://lh3.googleusercontent.com/-m...0/IMG_1549.jpg

Dave-ROR 02-20-2013 06:00 PM
Nice.. adds caster also it looks like :thumbup:

Hanakuso 02-20-2013 06:51 PM
AST?

mines13 02-20-2013 06:56 PM
Sweet plate

Touge Monster 02-20-2013 06:58 PM
Need some of these

Turn in Concepts 02-20-2013 07:12 PM
Quote:
Originally Posted by Hanakuso (Post 747543)
AST?
Nope - HVT.

Turn in Concepts 02-20-2013 07:15 PM
Quote:
Originally Posted by Touge Monster (Post 747559)
Need some of these
I should be able to get them up on the site tomorrow.

CSG Mike 02-20-2013 07:18 PM
I'm not even sure what I'm looking at, other than a camber plate. Please educate a noob!

g0lden 02-20-2013 07:18 PM
those things look nice :-)

OrbitalEllipses 02-20-2013 07:22 PM
Quote:
Originally Posted by CSG Mike (Post 747604)
I'm not even sure what I'm looking at, other than a camber plate. Please educate a noob!
Doesn't raise the car like a traditional camber plate; that's about all I can tell from the pictures (posted on various other forums earlier). It's got a bearing that should last and...well that's all I know about it. Haven't seen many other replacement spring perches with camber plates.

Turn in Concepts 02-20-2013 07:22 PM
Quote:
Originally Posted by CSG Mike (Post 747604)
I'm not even sure what I'm looking at, other than a camber plate. Please educate a noob!
A non-raising camber plate that works with springs and struts. :)

CSG Mike 02-20-2013 07:34 PM
Oooh gotcha. I must need more coffee today.

Does that mean this could alternatively slam a car and maintain suspension travel with coilovers, similar to Robi's setup?

Turn in Concepts 02-20-2013 07:39 PM
Quote:
Originally Posted by CSG Mike (Post 747648)
Oooh gotcha. I must need more coffee today.

Does that mean this could alternatively slam a car and maintain suspension travel with coilovers, similar to Robi's setup?
You could, but you'll net no more travel than using a stock hat. These don't lower the car, but maintain the stock stack height.

jamal 02-20-2013 10:11 PM
I hope @Racecomp Engineering doesn't find out about these.


All times are GMT -4. The time now is 03:39 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.