A/T Carbon Fiber Drive Shaft
 

Well I searched and I found it, but it looks like the thread got shut down.

Any ways, does anyone know if there is a CF drive shaft for the A/T guys? I know there was a group buy going on right before this last christmas, but it could never get enough people because of the timing.

Thread was shut down. None available yet. I would say that there is a good chance it is only a matter of time before one is available.

RallysportDirect was talking about potentially opening another thread to get one made for AT from PST. Also, Driveshaft Shop indicated they would produce one if somebody would send them a shaft from an AT for their development process.

If one is made available for the AT, I will buy it in short order... :-)

Same here. I hope somebody picks up the idea.

I've been talking to RallySportDirect and it looks like they should be opening up another group buy soon for the AT

Indeed! Due to yours and others support, we were able to get another thread started. :) You can find it here: http://www.ft86club.com/forums/showt...203#post759203


Thanks!
Rick

Yes!!!!

Bump for the week...

The Drive Shaft Shop is now making carbon fibor driveshafts for the Frs/Brz,...you might check with them also. Think I may have the first one made,....but check with them.

For AT?

Thanks.

I worked with the Driveshaft Shop and they used my driveshaft as a pattern. As far as I know I may have the only one at this point. I suspect that there is no difference between the AT & MT shafts because the one listed on their website no longer specifies that it's for 6MT.

I would suggest that someone contact them to confirm.

Wow thanks for this. I will get in contact with them today to see if I can confirm.

Thanks!
Rick

I just noticed that FT86 Speed Factory is now carrying both AT and MT driveshaft shop shafts so it looks like they are different.

I assumed they were different, I will see if I can confirm later today.

Thanks :)

Nice!