SSR Type C RS hub centric rings
 

I just bought SSR Type C RS 19x8+35, specially ordered from group buy in Australia.

Now, I know 86/BRZ has got a wheel bore metre of 56.1 as most Subaru does but I am not sure about Type C RS's bore size.
Apparently I have failed to search it from great Google world .

I know few of you guys have bought same rims, does any of you know what size hub ring I should buy and where?

http://www.more-japan.com/ssr-wheels-hub-rings/

You need 72.2-56.1 rings

I can confirm this, I have 72.2 to 56.1 T-6061 Aluminum hub-centric rings from SSR on my car.

My wheel supplier just sent me a reply and he said it is 79.5-56.1 hub centric rings.
Now I am confused.
Is Type C RS bore meter all different by size of wheel it self? I know Enkei's got all different bore meters by wheel size for same wheels.

Depends on the year of the type c I believe. If you want to double check get a measuring tape and check the diameter. It'll be easy to tell if you need the 72 or the 79. Also I believe the type F's bore was 79.

Thank you Calidrifter, my wheels will be arrived in mid April so I couldn't physically measure it yet.
but will double check with the supplier.

Type C in 5x100 has a centerbore of 72.2. so you'll need 72.2-56.1 hubring. Best to measure the centerbore to verify.

how did you get that sizing? I don't see a Type C in 19x8 +35 on their offset chart.

Type C 19"

Group buys often have sizing that isn't offered Off-The-Shelf.

Yep! Pre-order special size for frs/brz in Aussie 86forum sponsor.

Because this is special size wheel, I am more careful for the hub ring size.
But now my wheel supplier will get right hub rings from SSR for me.
Problem solved!