Auxiliary Switches
 

I'll be installing two rocker switches in the whatever-it's-called panel. It will look way nicer and cleaner than having the switches or a separate boxed taped on underneath. What you see below is the lower hole.

One of these switches will control my foot well lighting. I don't know what the other would be for though. Underglow maybe...:iono:...nah I'm just kidding.

Attachment 27277Attachment 27278Attachment 27279Attachment 27280Attachment 27281

Excuse the fact that the switch looks beat up. I'll be using new switches.

Are the pictures too big?

Attachment 27282

Nice, looking forward to seeing this.

I have my bass knob there.

i tried to kill that bug on your signature :bonk:

I'm glad I'm not the only one. I remember this one caused lots of broken tvs.

http://www.youtube.com/watch?feature...&v=V7sKexJ4Lmw


More:

Attachment 27286Attachment 27287Attachment 27288

where did u get the switch? that kinda switch I want for my fogs, coz dealer put the led alarm on that location I need a smaller switch.

im no electric expert or whatsoever. this works with a H11 harness and H11 bulb fogs? its going to overload the switch or something ? :iono:

How many watts are the foglights consuming? There really is no H11 harness. It is just some wires that are hooked up to H11 bulbs.

I still don't know what I would need a second switch for so I think I'm just goig to leave it at one for now. Ild rather not have a dummy switch.

Attachment 27289Attachment 27290Attachment 27291Attachment 27292

probably same watts consuming on stock headlights. since headlight are H11 bulbs. i'll be using the same bulb on fogs. what do u think? will it work?

Use the switch to trigger a relay. Problem solved.

For interior lighting with not alot of draw, could you purchase an interior dimmer switch and use the blank spot? would cost more, but thats where I would go.

Ya, but you are either going to want it on or off, not half way. I don't really think its necessary.