Jasper's FR-S build
 

I wasn't going to make one of these because I was going to leave the car stock and use it as a daily driver... That didn't work out so here is where I'm at and there are more parts on the way. I'll post pics and the total list will be in my signature block.

With that stripe, you don't need badges ;)

Yeah when I first got it everyone asked what it was so I spent $30 on some vinyl and stopped that question lol.

Sent from my SGH-T989 using Tapatalk 2

Just blacked out my head light chrome accents. Didn't turn out as well as I had hoped and I broke a little bit off of one lens but it doesn't show once they are installed.

Sent from my SGH-T989 using Tapatalk 2

Hey, what kinda car is that? :scared0016:

The worst part is now I get it jokingly all the time :)

Sent from my SGH-T989 using Tapatalk 2

Working on making my dash inserts carbon fiber should be all done on Monday.

Sent from my SGH-T989 using Tapatalk 2

you killed it

They are going to be removable

Sent from my SGH-T989 using Tapatalk 2

Still working on it

Sent from my SGH-T989 using Tapatalk 2

What kind of resin are you using? Just doing an overlay? I ask, because I was looking into making carbon parts myself, except vacuum bagging.

I used an off brand epoxy resin sold by a local shop. My dash piece is tapped and the carbon will be attached with double sided tape so it could, be removed if I had to.

Sent from my SGH-T989 using Tapatalk 2

I'm going to have to vacuum forum mine to make them look good enough for my standards using the old school method didn't work for me

Sent from my SGH-T989 using Tapatalk 2

Smoking the tail lights

Sent from my SGH-T989 using Tapatalk 2