Tripjammer's WRB BRZ Limited
 

[ame]http://youtu.be/yVa5x1FNBbA[/ame]

After months waiting for a whiteout FR-S, I can across a BRZ limited in transit to a dealer in Denver, Colorado. I jumped on it and got an awesome deal. Had it delivered to my house in San Antonio. Diamond Express Delivery is top notch in their services.

Current mods:

Exterior
Perrin Shorty Antennae
Perrin Exhaust Tips
LED's fog Lights
LED's turn signals
LED's in clear corners
LED's in rear side marker lights
LED's in backup lights
JDM clear front side markers
Suntek Clear film on front bumper and lower rear bumper
Suntek Clear film on full hood
Suntek Carbon XP window tint
Optiguard Pro after complete polish and paint correction
Rexspeed Convex Mirrors





Interior
JPM Coachworks Alcantara instrument cover
JDM red STI start button
Weathertech front floor liners
LED's in door panels
LED's in sun visors
LED bulb in trunk light
LED bulb in map light
Weathertech trunk liner




Under the Hood
Dynotronics 93 Octane Ecutek tune
Perrin battery tie down
Perrin oil cap
Grimmspeed hood struts
TRD CAI
Perrin master cylinder brace (ordered)
Greddy radiator cap (ordered)

http://farm9.staticflickr.com/8226/8...5431104f_b.jpg
It's got 8 miles!

http://farm9.staticflickr.com/8510/8...06ee0cf5_b.jpg

http://farm9.staticflickr.com/8079/8...bae744d0_b.jpg

http://farm9.staticflickr.com/8516/8...c06cb4a9_b.jpg

http://farm9.staticflickr.com/8193/8...701de411_b.jpg
Real Dirty!

http://farm9.staticflickr.com/8051/8...62502921_b.jpg

http://farm9.staticflickr.com/8333/8...af817ef0_b.jpg
Jay you need to do your magic!

http://farm9.staticflickr.com/8220/8...cb76fcff_b.jpg
Ah, a little better.

http://farm9.staticflickr.com/8237/8...a3156454_b.jpg

http://farm9.staticflickr.com/8051/8...9d1d3641_b.jpg
At least the engine was clean...LOL!

http://farm9.staticflickr.com/8473/8...2ac13d65_b.jpg

http://farm9.staticflickr.com/8223/8...26f117b9_b.jpg
At Jaysdetail getting much needed magic!

http://farm9.staticflickr.com/8351/8...af6f8015_b.jpg
Magic I tell you!

http://www.ft86club.com/forums/attac...1&d=1359594686
Got3n molesting her tips....LOL!

http://farm9.staticflickr.com/8356/8...45e9ac6f_b.jpg
Jay @ JaysDetailing finishing up the Optiguard. It's cure time!

Welcome to the community man!

BRZ Parts Phase 1
http://farm9.staticflickr.com/8513/8...177c2d7f_b.jpg

http://farm9.staticflickr.com/8499/8...11d92fe9_b.jpg

http://farm9.staticflickr.com/8370/8...e043f7dc_b.jpg

http://farm9.staticflickr.com/8185/8...677dcbcb_b.jpg

http://farm9.staticflickr.com/8360/8...4b9a6704_b.jpg

http://farm9.staticflickr.com/8372/8...fc5b3a03_b.jpg
The BRZ actually uses 7440 front and rear for the turn signals. They sent me 7443 for the front and 7440 for the rear.

http://farm9.staticflickr.com/8468/8...766fa2f4_b.jpg

Congrats man! Enjoy it!

http://farm9.staticflickr.com/8325/8...03f870f8_b.jpg
Dammit I lost an LED bulb into the rear housing. Anybody know how to get it out?

Maybe a vacuum cleaner or telescoping magnet might help.

By the way, if you think those reverse led lights are too dim, try some 360 degree type LEDs instead.

Ohhhh, A telescoping magnet! Yeah!!!

http://farm9.staticflickr.com/8189/8...8d5fb7f3_b.jpg
The Red STI start button came in. I just have to install it....

http://farm9.staticflickr.com/8328/8...5cca462a_b.jpg

http://farm9.staticflickr.com/8469/8...c759dfdd_b.jpg

http://farm9.staticflickr.com/8084/8...d7edf8e0_b.jpg

http://farm9.staticflickr.com/8079/8...54f6b831_b.jpg
Painters Tape is your friend!

http://farm9.staticflickr.com/8088/8...34185862_b.jpg
Done! This was the easiest mod to do.

I followed these directions:

Pop the passenger side center stack lower cover (below the knee pad) off. Reach in from behind and pop the USB connector out (push forward). The next step is to unplug the connection and push the wiring back through the exposed hole. After that reach into the now vacant USB hole with your pointer finger and pull gently. It may require some tugging a bit, but it will eventually pop out. Just go slow and use some Painters tape to cover the area in front of the shifter.

Thanks Bugeyedwagon!

Very nice first mods. I'd like to see pics of the fog LEDs.

http://farm9.staticflickr.com/8374/8...356122a5_b.jpg
I am waiting for my clear corners to come in before I do the LED fogs, so I can do them both at the same time. Already got amber LEDs for the clear corners too. I found that there is one more regular bulb in the rear tail lights, rear side marker light. I will replace that with an LED too.

Yeah my hands need some lotion.

I got the rear CREE led backup light removed from the left housing after it fell in earlier this week.

http://farm9.staticflickr.com/8043/8...fa1f1b16_b.jpg
I used this...a telescoping screw driver with a magnet on it. Went to my mums house and she had one, and it worked! It pulled right out very easily.

http://farm9.staticflickr.com/8071/8...372a6b80_b.jpg
Bright CREE LED Backup lights.

I tried to install my Grimspeed gas hood struts, but I gave up. I could not get those black screws to go in. I did not want to strip it.

http://farm9.staticflickr.com/8359/8...3b5691f7_b.jpg
Front LED turn signal installed. Looks high tech and special!

http://farm9.staticflickr.com/8376/8...15a314d5_b.jpg
Rear LED turn signal installed...

http://farm9.staticflickr.com/8465/8...c339d807_b.jpg
Chillin at mum's house...

http://farm9.staticflickr.com/8463/8...558eaf51_b.jpg
Perrin 2 inch Shorty installed. Everything still works perfect...HD Radio and the Satellite Radio.

Where did you get the STI button? The one on japanparts shows a separate led...

Pics of the rear led turn signals?

Sent from my DROID BIONIC using Tapatalk 2

japanparts.com

You have to get the correct one...its model number ZC6 for the USA BRZ limited.

Thanks, I missed that option!

[ame]http://youtu.be/jRRionzs_Ps[/ame]

How bright is it in the daytime?

Sent from my DROID BIONIC using Tapatalk 2

Very Bright! I will take some daytime video....

Thanks! I plan on doing everything LED with my FR-S. I was skepticle since I heard these weren't very bright in the day time.

Very Nice!

Like to see daytime clips of the turn signals. I have a 13 SMD LED turn signals and I could barely see them in broad daylight. Might have to upgrade to the 1.5W chips and CREE front.

Also, how does your fog LED match with your HID?

I will take some pictures for you....In the daytime

Some more parts installed...

http://farm9.staticflickr.com/8111/8...f367d8a5_b.jpg
Blue LEDs for the trunk light

http://farm9.staticflickr.com/8089/8...ae33bf95_b.jpg
Putting in a 5 LED amber bulb for the clear corner markers

http://farm9.staticflickr.com/8390/8...bf7c3fe5_b.jpg
White LED fog light on

http://farm9.staticflickr.com/8099/8...cb62cc43_b.jpg
All lights on...notice the LED fog lights match the stock HID headlights

http://farm9.staticflickr.com/8241/8...2159296f_b.jpg
All lights off

http://farm9.staticflickr.com/8379/8...6386fb69_b.jpg
Left side clear corner marker

where did you get the LED for the fogs? can you send me a link? thanks!

http://farm9.staticflickr.com/8382/8...1d153594_b.jpg
Jay @ Jaysdetail Applying Xpel Paint Protection Film to the front bumper.

http://farm9.staticflickr.com/8230/8...88f67ef9_b.jpg
Optiguard is the bombdigity!

http://farm9.staticflickr.com/8087/8...d342da25_b.jpg

http://farm9.staticflickr.com/8091/8...81158480_b.jpg
No mud guards! Xpel film here is the way to go!

http://farm9.staticflickr.com/8088/8...8b4556bc_b.jpg
Trying to get to 1000 miles!

Ok I have decided to go with the Motiv overpipe and front pipe and the upcoming Motiv cat back exhaust...so to tide me over I bought some Perrin Exhaust tips. These are awesome!

http://farm9.staticflickr.com/8229/8...d088b740_b.jpg

http://farm9.staticflickr.com/8509/8...faf28b0a_b.jpg

Great stuff so far, You sure did go crazy with the LED's

Here you go:

http://www.diodedynamics.com/store/i.../category/647/

They come in Yellow or White. I went white. I will take a pic in the day and night with them on. They are mad bright white. Totally awesome. Expensive but worth it. They are a perfect fit. No modification needed. Forget trying to retrofit hids in there get these.

All the lights in the car in and out are LEDs besides the HID headlights.

Yeah, but it is so awesome! You see what them LED fogs and turn signals look like? OMG so pimp and high tech. Its what the car should have come like from the factory. Hehe

http://farm9.staticflickr.com/8372/8...eeb2d649_b.jpg

Oh yeah!!!! Thanks to dynotronics up in New Braunfels.

Joe hooked it up.

Have not done an update in awhile.

Ok the tuning is going real good. The tuner had me wrong in his notes, so my car was running crappy, but we all past that now. Baby Blu is getting fast!

I just did some datalogging on the last ROM file Dynotronics sent me and damn this sucker is getting sharp. Throttle response is off the hinges!

I ordered yesterday the WeatherTech floor mats. Should have them early next week.

I plan of ordering the Perrin Inlet Hose
http://www.perrinperformance.com/brz...brz-inlet-hose

and the Perrin Panel Filter
http://www.perrinperformance.com/brz...s-panel-filter

and the Cusco Radiator Cap
http://ft86speedfactory.com/cusco-ra...s-brz-188.html

ssooooooo jelly about the color of your car, that blue is just awesome on the brz. Good choice on the exhaust tips aswell.

Any Feedback on the airfilter? Is it worth the money? Noticed any changes (sound or performance wise?)

Cleannnnn brz!!!! love that color

I think it makes the difference, but I want something different.