wrapping interior pieces
 

I'm planning on wrapping my interior car pieces with CF and was wondering if all the plastic pieces (dash, middle dash, shifter, steering wheel, and door handles) could be pried off with just a flat head.

I know the middle dash piece just requires your fingers but I couldn't find a good DIY or example of how the steering wheel plastic and door handles were removed. only reason I ask is I dont want to poke around the air bag with a screwdriver.

don't use a screwdriver. Buy a trim panel removal tool. it's like a plastic spatula that won't wreck your trim pieces. They are also like 3 bucks.

I think there is a thread in the DIY section that details how to remove the interior trim

Edit:

http://www.ft86club.com/forums/showt...highlight=trim