Work Emotion Ultimate CR
 

Hi, I just bought 4 work wheels in 18x8.5 +48

I prdered +30 bit the guy who selled to me in the store told me that with +30 wouldnt fit to my GT 86. Is this true?

Please help me.

Thanks

take them back and tell him to get you what you ordered, and then punch him in the d1ck.

for reference i have the same rims except 9.5 on the back and the fronts are 8.5 with +38 offset.

Do them work well in your car ? Can u send me a photo ? Do u need coilovers?

Just want to know if with an offset of +30 or +38 they ate foing to fit and work well ...

I don't have pics, it's the middle of winter here so I'm on my snow tires. +38 is the standard offset if you look at the other threads for these wheels. I'm not sure about the back with 8.5 though.

I'm going with Eibach Sportlines instead of coilovers.

Ok thanks anyway

I just order 18x8.5 +38 and 18x9.5 +38 and they are supposed to fit fine.

The +48's will work but will probably be a flat faced wheel. You could meet in the middle and go with the +38. In the sticky above there are a few cars running +38 and up offsets.

Heres mine on 18x9.5 +38 all around. Also lowered on stance coil overs.

http://farm9.staticflickr.com/8471/8...0e601d4b_z.jpg

Oh god. That is one sexy set up.

Yes, it's true.

However most people seem to actually want wheels that don't fit.

its kind of not true because the definition of "fitting" varies from person to person and setup to setup

but if you're asking whether +30 will fit on stock suspension or not:

there's no problem with the rear (would be near perfect actually)

but the front will stick out past the fender some

I love these RIMS! I must have theses.

Here is what they would look like if you got 18x9.5s all around +30. This is my ride.