Do you think a 17 x 9.5 would fit with out any spaces or needing to shave (255 Tire) ? Considering a RPF1 17x9.5. Thanks for taking the time to do this!

You haven't mentioned the offset. That's going to be critical. At +42 give or take a mm or two, you should be good.

--Dan
Mach V

sorry 38 is the offset

Tough to say. It's going to depend on how low the car is, and even what tire it is.

--Dan
Mach V

dan, dont mean to thread jack, but i'm thinking 18x9.5 +40, on coilovers and a 255/35 michelin PSS. i wont be slammed, but no wheel gap-ish area.

you think i'll have issues getting that setup fitted up front? i know the rear wont be an issue, but in the front will i have to run more than 2' of camber to get it to fit right? really wanna keep a square setup on the car. i'm also fine with having to roll and pull the fenders a bit, i'm expecting to have to do that anyway, or i wont need to?

I think that's better discussed in another thread, or we can talk on PM.

--Dan
Mach V

Fitment looks fantastic!

Renato
Team TWM Performance

@Mach V Dan Do you think a 3mm spacer will do for the 265's since it worked with a 5mm spacer and my wheels will be a +40 and not +42?

Probably.

--Dan
Mach V

I was hoping for a more confident answer, lol! I already ordered 5mm spacers but the 3mm's are cheap so ill get them too and see if it works. Thanks!

Added to the Wheel Directory
http://tinyurl.com/86wheels

I stand corrected, now that my car is in Street Mod, I ordered a set of these today in Gunmetal for my competition setup.

275/35s Hoosiers on the way--hope they stuff under the car! lol

These slim & trim coilovers should allow them to clear--I hope...

http://farm9.staticflickr.com/8368/8...36c51c61_z.jpg

I'll post pics when they're mounted.

Mach V 18x9.5 +42 Wicked Awesome w/ 275/35 Hoosiers
 

My new competition setup--they fit... This is great, as this setup is a huge increase in size, and they only weigh ~2 lbs/corner more than stock.

Caveat--I run an MCS coilover setup w/ 2.25" springs--much smaller circumference than OEM front struts.

I took it around the block & threw it around some--barely heard any rubbing sounds.

-2.5 front camber -1.3/2.0 rear (wonky stock camber)

Car has some rake as you can see. The fitment is pretty flush.

Looks pretty beefy.


http://farm3.staticflickr.com/2870/1...55db4206_b.jpg
http://farm8.staticflickr.com/7374/1...c1e3f4e8_b.jpg
http://farm4.staticflickr.com/3750/1...a90ea63a_b.jpg
http://farm4.staticflickr.com/3794/1...c38b4248_b.jpg
http://farm3.staticflickr.com/2886/1...13c98fb1_b.jpg
http://farm8.staticflickr.com/7406/1...f8e7d62c_b.jpg
http://farm8.staticflickr.com/7455/1...bf49be34_b.jpg
http://farm3.staticflickr.com/2894/1...ec636efc_b.jpg

Nice, tidy fit. Mud guards and all!