TAKEDA INTAKE
 

Guy's I am pumped I installed a Takeda Momentum Intake on my car this Saturday and it went great. Car is running like a top. no issues with Bogging or hesitation of any kind. Nice sound when it revs over 4K.

Thanks goes to Jeremy at FT-86 Speed Factory. These guys get right back to you when you ask a question.

looks good! xcept its upside down D: lol

Thanks

I wish I could install mine ;( , it's so cold everything is frozen even inside my garage

Get a space heater :D

It was about 30 degrees when I installed this. It only takes about 30 Minutes. the trick is making sure that when you pop off the fender light be sure t make sure you get the clip that holds on the front Bumper. After that the install goes quick.

It's been -16 Celsius and below here for like a week
Make sure I get the clip? Your talking about the side markers ?
Why does that have to come off for the intake install ?

You will have to remove the Drivers side Marker Light and the clip that hold the front bumper because you will need to remove the existing air intake that comes stock. I thought the same thing. just be careful prying the Marker light. I will try to post the PDF of the directions they came in handy when installing. better the the Black & White pictures that come with the intake.

Marshal, See attached. Hope this helps.

Looking good man ! I might have to look into getting one of these.

Bro your picture doesn't load

That's cuz it's a PDF file

Sent from my GT-N7100 using Tapatalk 2

I will just type in the link. That should work.

http://afepower.com/catalog/TM-2013B-D/is.pdf

Try typing this in and you will get the color install directions.

Hope this works