Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Pivot dual gauge (https://www.ft86club.com/forums/showthread.php?t=25007)

GT86drifter 12-28-2012 11:01 AM
Quote:
Originally Posted by ZC6BRZ (Post 627330)
It's actually a switchable Exhaust/Oil Temp (digital) and water temp (analog), so you win!

Analog display: Water temperature

Digital display: Oil temperature, intake air temperature (display switching)

not exhaust temp...

The DX series to display multiple data in easy installation of the coupler on the diagnostic connector failure, easy to see the best Subaru BRZ and Toyota 86, the water temperature, display switching in digital intake air temperature and oil temperature, illumination color is akin to genuine I want to add a color meter can be selected. In addition, we are provided with a holder that can blast through a gap in the mouth, the two types of holder that can be attached to the dashboard, such as meter and meter balloon be attached to the outlet.

google translate :happy0180:

Cameronghanson 12-28-2012 02:05 PM
Love it

Walldodger 12-29-2012 07:49 AM
Damn! If engine oil temp and digital transmission temp was an option I'd order it now.

Guillaume 01-25-2013 05:41 AM
Anyone received theirs so far? I am on the verge of getting one and some feedback would be appreciated.

msile 01-25-2013 09:47 PM
Quote:
Originally Posted by neutron256 (Post 629364)
Anyone know how to remove the existing vent piece? I'd like to take it out and see how hard it would be to make a custom piece that would fit standard gauges.
Check out my post:

http://www.ft86club.com/forums/showt...668#post689668

Guillaume 02-07-2013 09:38 AM
Got mine this morning, super easy install.

[ame="http://www.youtube.com/watch?v=52flLT0KLcA"]Pivot DXW Dual Gauge start-up - YouTube[/ame]

jadewbj 02-08-2013 10:13 AM
Quote:
Originally Posted by Guillaume (Post 718262)
Got mine this morning, super easy install.

Pivot DXW Dual Gauge start-up - YouTube
No problems putting it in LHD?

Guillaume 02-08-2013 05:33 PM
Quote:
Originally Posted by jadewbj (Post 720999)
No problems putting it in LHD?
None at all.

mechaghost 02-08-2013 05:36 PM
do they have anything for boost? :)

JD86 02-11-2013 03:47 AM
There's a boost/water temp/oil Temp guage on their website... But given that there's no turbo on the 86/BRZ/FRS there's no option to buy the correct mounting for it... Also it's in KPa not PSI to confuse our imperial measurement friends from the US.

If anyone can figure out how to order the 86 vent mount and the boost guage I'd be in for this!

If you want to go super crazy Greddy has a 62mm master gauge that reads everything... and I mean everything (boost, oil temp, oil pressure, water temp, Air fuel mix etc...) in one. But you're looking at well over a grand to set it all up.

schtebie 03-02-2013 11:11 PM
Are there any Pivot dealers in the US?

It'll be kind of a pain to order from an overseas vendor...

Turbowned 03-03-2013 12:32 PM
Cool! Do they make one that displays oil pressure?

Turbowned 03-03-2013 12:35 PM
Quote:
Originally Posted by JD86 (Post 726699)
There's a boost/water temp/oil Temp guage on their website... But given that there's no turbo on the 86/BRZ/FRS there's no option to buy the correct mounting for it... Also it's in KPa not PSI to confuse our imperial measurement friends from the US.

If anyone can figure out how to order the 86 vent mount and the boost guage I'd be in for this!

If you want to go super crazy Greddy has a 62mm master gauge that reads everything... and I mean everything (boost, oil temp, oil pressure, water temp, Air fuel mix etc...) in one. But you're looking at well over a grand to set it all up.
Might as well just get the GReddy Informeter at that point...

Splat 03-03-2013 08:59 PM
Quote:
Originally Posted by Guillaume (Post 718262)
Got mine this morning, super easy install.
Old fashioned I am, is it only C, not an F option?


All times are GMT -4. The time now is 03:39 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.