Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Australia Classifieds (https://www.ft86club.com/forums/forumdisplay.php?f=57)
-   -   WTB : Wheels & Rear trunk spoiler (https://www.ft86club.com/forums/showthread.php?t=24900)

AusFt86 12-23-2012 08:59 AM
WTB : Wheels & Rear trunk spoiler
 
Anyone know where can i buy TRD rear trunk spoiler MS342-18001-A0 in White [37J] and Work CR Kiwami Wheels 18 x 8.5 +38 front with 18 x 9.5 +38 in Dark Bronze [AHG]
Or if anyone wants to sell theirs?
Thanks in advance

DanVIIIVI 12-23-2012 10:01 AM
There was a couple of TRD spoilers pre-painted on ebay. I know StreetFX were selling one there. Otherwise check out importmonster, if they don't have one now, can get one no problems.

MACCAA 12-23-2012 05:45 PM
There's a white TRD spoiler for sale at gt86comau
Cheers
Len

AusFt86 12-26-2012 05:41 AM
Quote:
Originally Posted by MACCAA (Post 624358)
There's a white TRD spoiler for sale at gt86comau
Cheers
Len
Quote:
Originally Posted by DanVIIIVI (Post 623915)
There was a couple of TRD spoilers pre-painted on ebay. I know StreetFX were selling one there. Otherwise check out importmonster, if they don't have one now, can get one no problems.
Thanks mate :thanks:

&

Merry c"mas guys

D1 86 12-27-2012 03:40 AM
Or try the guys over here in NZ at north shore Toyota.
Peter, Nick or Keegan.

Nafe 12-30-2012 08:35 PM
Just as a tip - the 9.5in +38 WILL stick out at the back, so if you want to stay legal, maybe go a less aggressive offset. If you don't care about being legal, go for it :)

Xauterus 12-31-2012 03:43 AM
1 Attachment(s)
I dropped mine 30 mm on the rear and it sat pretty good.

When I put the 9.5in +38 on the rear at stock height and camber they stuck out terribly.

You will be surprised how much the camber changes in 30mm and how well the wheel tucks in. I correct mine with Cusco lower arms and the wheels sit ok.

That is 1.5 degrees negative.

Nardi330 12-31-2012 06:46 AM
Running -1.5 degree at the rear and your wheels tucked in?

I'm running -2 and its not completely flushed. Most 9.5+38 that are flush on this forum are running -3 at the back....

Xauterus 01-01-2013 04:31 AM
Maybe the Pirellis are thinner than some other brands. 245/35 18

How much did you drop your height?

Nafe 01-01-2013 04:38 AM
Nardi's are the ones I have seen that stick out. with his -2 camber it isn't too bad, but probably 6-8mm??
Tyres don't affect how much the WHEEL sticks out... If the wheel is outsie of the guard it is illegal. Doesn't matter if the tyres is under..

AusFt86 01-09-2013 07:55 AM
1 Attachment(s)
Quote:
Originally Posted by Nafe (Post 635366)
Just as a tip - the 9.5in +38 WILL stick out at the back, so if you want to stay legal, maybe go a less aggressive offset. If you don't care about being legal, go for it :)
Really :confused0068:
Thanks for the tips

I thought it would look like

AusFt86 01-09-2013 08:00 AM
Quote:
Originally Posted by Nardi330 (Post 635993)
Running -1.5 degree at the rear and your wheels tucked in?
I'm running -2 and its not completely flushed. Most 9.5+38 that are flush on this forum are running -3 at the back....
Quote:
Originally Posted by Nafe (Post 637444)
Nardi's are the ones I have seen that stick out. with his -2 camber it isn't too bad, but probably 6-8mm??
Tyres don't affect how much the WHEEL sticks out... If the wheel is outsie of the guard it is illegal. Doesn't matter if the tyres is under..
Then how come NIX (Blue BRZ) have the same offset but his tucked perfectly ( he said his -2.1 deg rear )

May be i need Rear lower control arm ?

Or i just need to low it more?

AusFt86 01-09-2013 08:02 AM
Quote:
Originally Posted by Xauterus (Post 635900)
I dropped mine 30 mm on the rear and it sat pretty good.

When I put the 9.5in +38 on the rear at stock height and camber they stuck out terribly.

You will be surprised how much the camber changes in 30mm and how well the wheel tucks in. I correct mine with Cusco lower arms and the wheels sit ok.

That is 1.5 degrees negative.
Thanks man :thanks:

Then what offset do you think its safe to run if i still wants to run staggered?

May be 8.5 +45 (f) & 9.5 +45 (r) ??

Nardi330 01-09-2013 08:19 AM
My car has extra track from the factory then??!!?? I'm very lost.

Or maybe My wheels are +30 instead of +38......

8.5+45 and 9.5+45 is very safe


All times are GMT -4. The time now is 11:30 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.