Limited BRZ AT
 

Might be starting this a little early, but want a place to put pictures. I got pretty lucky with my purchase. This had a deposit down on it & when it finally being delivered, the transporter got in a wreck and damaged the car pretty bad. Subaru told the dealer they would replace it, but I guess the guy with the deposit got tired of waiting and backed out. So after the dealer told me that story, I had my deposit down on it & waiting for the replacement car arrival! I had to wait a "long" 5 days. haha

Here it is at the delivery station...Getting the run down about the car. I actually knew more than him because it was the first one he sold & they haven't had very many to come through.
https://sphotos-a.xx.fbcdn.net/hphot...52568085_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...52726901_n.jpg

Picture with my Jeep I traded in.. It was a 2012 fully loaded Rubicon

https://sphotos-a.xx.fbcdn.net/hphot...76860988_n.jpg

The week I picked it up was nasty and raining, didn't get many pictures

https://sphotos-b.xx.fbcdn.net/hphot...18361070_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...50188431_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...99510892_n.jpg


That's about it for now.. I only got to drive it for 2 days before I had to come to work(Offshore). But I drove it close to 400 miles to the dock to try and rack up the miles to 1,000! Won't be much longer and the real fun starts.

Only problem is there is so many things I want to do to it, but it is cutting in my money to finish my truck for next show season, already have tons of parts waiting to be installed on it... So for right now, I want to get the truck done. Not like the BRZ needs help in the looks department, I get stopped and asked 100 questions at every pit stop!

Here is the truck now, pretty stock as you can see. But I have full set of custom control arms from MMW, Nfamas 3-link, full AccuAir air management & height controller with 20" Coy C-57's

https://sphotos-b.xx.fbcdn.net/hphot...92389772_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...08940729_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...26909776_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...89688188_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...13291568_n.jpg

Here is my rendering for final product.. Going to be a sweet cruiser when not in the BRZ!

https://sphotos-a.xx.fbcdn.net/hphot...05762293_n.jpg


BRZ won't be completely be on the back burner though. Ordered a set of full replacement LED lights for interior & exterior. Have a friend of mine that runs a paint shop so I'm going to get him to kandy red my taillights & thinking about having my roof painting gloss black & appointment for the tint shop is already setup for when I come home.

Crossed that magic number last night!
https://sphotos-b.xx.fbcdn.net/hphot...31359297_n.jpg

License plate and interior LED's installed.. Still have to do door lights, truck light & side marker lights.
https://sphotos-b.xx.fbcdn.net/hphot...18121988_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...49896797_n.jpg

Looks great! Welcome to the club :)

Thanks.. Good to be in it. Love this car!

Looks good! Keep up the good work.

Thanks. Was wanting to tint my taillights red this time home, but it has been cold and raining...Not good painting conditions.

No major changes.. Did order the Perrin Inlet Hose from Chris@phastek and took some pictures from a day trip to Glaveston.

Her first ferry ride..
https://sphotos-a.xx.fbcdn.net/hphot...68442078_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...97493829_n.jpg

Not a bad day for January!
https://sphotos-b.xx.fbcdn.net/hphot...25254233_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...17789760_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...58921849_n.jpg

Perrin Inlet Hose installed! Super easy & cleans up the engine bay a lot. Loving the less cabin noise, can actually talk to someone without yelling..
https://sphotos-a.xx.fbcdn.net/hphot...37943019_n.jpg

...

Are you planning on changing the exhaust ever?

Yes. Planning on Perrin header back, catted & resonated.