|
1986 Subaru Leone RX TURBO STi
its not a BRZ / FT86 / FR-S its your great great great grand father of the blood line !
1986 Subaru GL-10 Turbo AKA The Leone we start of with a stock 1986 Subaru GL-10 FWD TURBO orig 28,000kms 17398.miles. weight is 910kg 2002lb car !! http://farm7.staticflickr.com/6108/6...5f700953_b.jpg http://farm8.staticflickr.com/7271/7...e06f99c5_b.jpg the parts car for awd and 5x100 86 xt6 http://i1260.photobucket.com/albums/...O/IMG_3299.jpg so what we have hear is to add the 4WD system into one of these cars, those are 20MM sway bars, above the sway bars is what holds the diff, about that is a mix and match of old and new to hold the STi 6mt, above that is a updated version of control arms to hold the 5x100 knuckle. http://farm8.staticflickr.com/7125/7...b47cd822_b.jpg rear axle XT6 for the R180 3.900, there is a trick to these where i mix the outer with the new style inners to run a R180. or i could just stay light weight and put a R160 in it. http://farm7.staticflickr.com/6037/6...dafbb68a_b.jpg cusco motor tranny mnt http://farm8.staticflickr.com/7229/6...c9ea144b_b.jpg ARP head studs, Cam & Crank sensor new oem http://farm7.staticflickr.com/6222/6...d1bb7bbe_b.jpg Spare EJ22T Built @ SUBARU TECNICO INTERNATIONAL http://farm8.staticflickr.com/7169/6...26495ec7_z.jpg http://farm8.staticflickr.com/7176/6...a1c04f49_b.jpg just got a little eye candy from Jon at full race coming soon !! http://farm8.staticflickr.com/7052/6...51011cfe_b.jpg Well got half the brakes sorted out for the project http://farm6.staticflickr.com/5159/7...26a4e78b_b.jpg so got a little oem new parts in today xt6 wheel bearings, xt6 steering tie rod, mustache bar bushings, and new diff support. also have 2006 wrx 2pot rear backing plates, but i sent them out to a friend's machine shop to make a ring for the centering ring http://farm6.staticflickr.com/5337/7...e55be878_b.jpg new turbo set up full race twin scroll http://farm6.staticflickr.com/5239/7...f26e5b2e_b.jpg http://farm8.staticflickr.com/7119/6...e484a84d_b.jpg http://farm6.staticflickr.com/5463/7...b2b81338_b.jpg http://farm6.staticflickr.com/5446/6...664a90e8_b.jpg http://farm6.staticflickr.com/5238/6...9c394405_b.jpg http://farm6.staticflickr.com/5040/6...28f428d0_b.jpg so parts list is VER 8 Sti complete Vi-PEC V88 EXEDY ?? dont know yet maybe multi plate to hold the power SPARCO seats: maybe, kind of want it stock but need support lol Rims: gc8 and volk jdm if i can find them Tire's : RACE SLICK lol for evey day haha !! new rotor pads that wont stop this much power to weight lol http://farm9.staticflickr.com/8001/7...37ed0227_b.jpg my rear control arms, that me and my dad had to make a tool becuase no one on the plant has one lol http://farm6.staticflickr.com/5276/7...c5e14d2a_b.jpg http://farm8.staticflickr.com/7105/7...dca78e92_b.jpg http://farm8.staticflickr.com/7192/7...e696f3dc_b.jpg little thermal coat so then i can wrap them http://farm8.staticflickr.com/7255/7...d5587f8f_b.jpg got some tubes to make my wastegate pipes longer away from everything http://farm8.staticflickr.com/7134/7...9a9b5ce3_b.jpg Little powder coat action http://farm6.staticflickr.com/5195/7...cdcfb489_b.jpg Got my 2006 wrx backing plates all fixed up so they can fit on the hub the xt6 hubs as instructed from Suberdave ! http://farm8.staticflickr.com/7230/7...9d1964b3_b.jpg So I went and picked up a Jdm spec c version 8 (maybe type RA?) motor swap Ej207DW7ER TY856WB6JA for heads and tranny diff and way ever else I need to twist my leone in to pretzel lol http://farm8.staticflickr.com/7086/7...52978e47_b.jpg http://farm6.staticflickr.com/5350/7...270fc12e_b.jpg Also I was driving to see the boys at Nvauto and I seen a gc impreza on top of another car scrap yard ! so I found the rims I wanted for a steal 250. So I sent them out to the sand blasters to get ready for the powder coating. I'm thinking world rally blue color for the rims http://farm6.staticflickr.com/5191/7...7e7e6410_b.jpg http://farm9.staticflickr.com/8155/7...fc165515_b.jpg started stripping for what i need http://farm6.staticflickr.com/5323/7...480cf5dd_b.jpg http://farm9.staticflickr.com/8143/7...13d7be61_b.jpg SUBARU TECNICO INTERNATIONAL EJ22T built bottom end, JDM EJ207 STi Version 8 Type RA heads all oem ! http://farm8.staticflickr.com/7225/7...314c7e4c_b.jpg http://farm8.staticflickr.com/7230/7...db3d2f1a_b.jpg finished wrapping my headers and turbo http://farm8.staticflickr.com/7077/7...f275c9c3_b.jpg http://farm8.staticflickr.com/7076/7...113cd4a2_b.jpg and got my PURPLE KUSH rims back from the powder coaters, two more sets to do with other crazy colours http://farm8.staticflickr.com/7214/7...96356aa9_b.jpg http://farm8.staticflickr.com/7240/7...ebe2f039_b.jpg |
well this just worked out perfect ! its like subaru new i was going to stick a water pump for my AWIC set up.
http://farm8.staticflickr.com/7258/7...35ebf606_b.jpg http://farm9.staticflickr.com/8164/7...147eb44b_b.jpg http://farm9.staticflickr.com/8160/7...f2baf633_b.jpg Bosch 044 fuel pump, need some angle fitting and done. http://farm8.staticflickr.com/7255/7...3b846894_b.jpg rear mustache bar is ready to hold the R180 just need to make a bracket for the front of the diff and done. http://farm9.staticflickr.com/8007/7...c7eb87e5_b.jpg well this is the tie rod problem taken care of, its simple and works perfect like ! top is xt6 legacy impreza middle gl-10 turbo last is whiteline new style what you do is chop the end off so you can toe in the car like factory ! http://farm9.staticflickr.com/8016/7...4975228e_b.jpg http://farm9.staticflickr.com/8426/7...85b6fbae_b.jpg light weight knuckles ! top secret so the competition dont know ! http://farm9.staticflickr.com/8421/7...63bcc072_b.jpg 4pot ready for action ! brembos maybe in the future but who cares really when your going to be this light and fast lol http://farm9.staticflickr.com/8425/7...6817c862_b.jpg rear just started so sunday all done. http://farm9.staticflickr.com/8289/7...ef0709e0_b.jpg the rear suspension is all old school up top and coilover down town, ill show how i did it very easy to do and keeps all the oem rubbers for when i pick up the ladys and its a nice soft ride ! http://farm8.staticflickr.com/7113/7...821c6511_b.jpg HeLLaFLuSH for all you pimping OG's out there !....... these wheels are just to roll it out the shop on monday ! i like to go HELLaFAST LOL. http://farm9.staticflickr.com/8143/7...c48295ef_b.jpg http://farm8.staticflickr.com/7132/7...79fba217_b.jpg http://farm8.staticflickr.com/7133/7...aa6a29ce_b.jpg http://farm8.staticflickr.com/7124/7...d955848c_b.jpg http://farm9.staticflickr.com/8423/7...b2fb138d_b.jpg http://farm9.staticflickr.com/8023/7...95c613df_b.jpg bed time http://farm8.staticflickr.com/7107/7...224043be_b.jpg well rear is all done suspension knuckles and rims tires http://farm9.staticflickr.com/8143/7...0eb0c060_b.jpg http://farm9.staticflickr.com/8008/7...22f854ce_b.jpg and my amazing light weight battery came in and its in my winter beater to keep it warm for when the Leone is done http://farm8.staticflickr.com/7273/7...8589a8ef_b.jpg my old school momo hub found in germany !!! http://farm9.staticflickr.com/8288/7...2290f1f2_b.jpg http://farm8.staticflickr.com/7251/7...97b87e1d_b.jpg http://farm8.staticflickr.com/7133/7...01884fd2_b.jpg flowmaster hush muffler !! only thing that can fit on this little car ! http://farm9.staticflickr.com/8159/7...9c11727d_b.jpg http://farm8.staticflickr.com/7117/7...7945682a_b.jpg this is what my tip will look like after i weld it all up. but with a foot of pipe in the middle of the two. http://farm9.staticflickr.com/8021/7...0e52aca8_b.jpg my pipe 3' 304 polished http://farm8.staticflickr.com/7276/7...90e4d88a_b.jpg support for the front lip, oem subaru http://i1260.photobucket.com/albums/...O/fc7582de.jpg http://i1260.photobucket.com/albums/...O/c59b9761.jpg put them on http://i1260.photobucket.com/albums/...O/5197c6cc.jpg http://i1260.photobucket.com/albums/...O/9e9e1cdf.jpg Franz crazy at work on my wiring, this is only half the paper work on my stuff. http://i1260.photobucket.com/albums/...O/2257036c.jpg and the pin porn for the wiring he is doing for my hole car ! http://i1260.photobucket.com/albums/...O/a636126d.jpg r180 read for service ! http://i1260.photobucket.com/albums/...O/4e2c8e12.jpg my brand new Bosch 044, these fittings are from the UK for the ford cosworth ! who would have guessed the Leone had the same set up !! http://i1260.photobucket.com/albums/...O/56b99171.jpg my hsd front camber plates came in ! thank you JRP for letting me do what i had to do to get my suspension all sorted out !!. http://i1260.photobucket.com/albums/...O/IMG_3676.jpg http://i1260.photobucket.com/albums/...O/IMG_3668.jpg http://i1260.photobucket.com/albums/...O/IMG_3670.jpg http://i1260.photobucket.com/albums/...O/IMG_3671.jpg http://i1260.photobucket.com/albums/...O/IMG_3674.jpg http://i1260.photobucket.com/albums/...O/IMG_3675.jpg the front is a bit to low, which will come up after corner balance and aliment get worked out. i wouldnt want the honda crowd thinking i want to race lol. i didnt want to add this but i need a bigger opening or else i could not use 2nd 4th 6th or R gear !.. so STi plate with boot, just waiting for the bolts to come in now. http://i1260.photobucket.com/albums/...O/3b4adad1.jpg http://i1260.photobucket.com/albums/...O/003dd18d.jpg AWIC pipes and other bits which is moving along nice and smooth. couple back order stuff which is killing me ! summer is all most done. http://i1260.photobucket.com/albums/...O/IMG_3688.jpg http://i1260.photobucket.com/albums/...O/IMG_3685.jpg http://i1260.photobucket.com/albums/...O/IMG_3687.jpg http://i1260.photobucket.com/albums/...O/IMG_3683.jpg http://i1260.photobucket.com/albums/...O/IMG_3684.jpg clutch line made fluid and bled, ready to go http://i1260.photobucket.com/albums/...O/db2755b6.jpg this picture is just crazy all in its self !!! it makes me not even want to drive this car and put it away for another 26years !!!! Franz Diebold wiring Diebold Autosport ! its just so beautiful i am speechless !! thank you Franz. http://i1260.photobucket.com/albums/...O/bac373bd.jpg shifter plate is all done bolts in. http://farm9.staticflickr.com/8294/7...f6ccf40b_b.jpg my LC1 is ready to auto tune and get me going till Franz comes and really dials it in http://farm9.staticflickr.com/8434/7...7a4c118b_b.jpg and the diff is mounted in ready to go http://farm8.staticflickr.com/7280/7...4ca76036_b.jpg the bracket my father made extra strong so the diff dont end up down the street LOL http://farm9.staticflickr.com/8284/7...a8304d77_b.jpg my brake lines all made up this is the rear it has 2 sections that i got made. http://farm8.staticflickr.com/7138/7...613999db_b.jpg http://farm8.staticflickr.com/7120/7...ede19b8a_b.jpg front brake lines done http://farm9.staticflickr.com/8422/7...37dac05e_b.jpg and the diff fluid is ready to be add http://farm8.staticflickr.com/7271/7...b7d8b8ef_b.jpg |
injector dynamics 1000cc
http://farm8.staticflickr.com/7128/7...200cf8e2_b.jpg install all goods http://farm9.staticflickr.com/8439/7...f1b2367d_b.jpg Franz amazing harness. swapped the avcs from passenger side to drivers side, then all in one plug... + add boost controller plug, oil pressure, fuel pressure. http://farm9.staticflickr.com/8426/7...c3648b63_b.jpg Vi-Pec V88, and my mod case mount to make it sit in the factory spot like oem that i did. http://farm9.staticflickr.com/8284/7...34880554_b.jpg fits like a glove [img]http://farm9.staticflickr.com/8437/7763468032_c46e49***b_b.jpg[/img] http://farm9.staticflickr.com/8448/7...5ff44b09_b.jpg fits right where subaru put the original oem 1986 http://farm9.staticflickr.com/8291/7...43955279_b.jpg http://farm9.staticflickr.com/8297/7...cbc383c2_b.jpg here we have the shifter mount, its a mix of 1986 sway bar bushing rubber and good old fashioned father steal bending and welding. ! lol its so simple but yet feels so right when shifting. http://farm8.staticflickr.com/7266/7...5b9e16c8_b.jpg http://farm8.staticflickr.com/7126/7...a2c10354_b.jpg then we had to fix the rear sway bar mount points, thanks to the great Canadian salt we use for our roads, it destroyed the tabs to hold my mounts. http://farm8.staticflickr.com/7256/7...6733d146_b.jpg way it should look with a tab, but not a hole in the middle ! http://farm9.staticflickr.com/8432/7...b8b9bf67_b.jpg so once again my father came up with these, we made these tabs which is nice and thick to last 50years. once you weld them over paint and done. http://farm8.staticflickr.com/7121/7...7a929b6d_b.jpg oem 86 XT6 20MM sway bar http://farm9.staticflickr.com/8308/7...20504c6d_b.jpg http://farm9.staticflickr.com/8300/7...3d9e8ded_b.jpg 1986 GL-10 Turbo Filter looks way better made then the new style. http://farm9.staticflickr.com/8303/7...3d710f2b_b.jpg http://farm9.staticflickr.com/8293/7...414a2b7b_b.jpg so we are pretty much done under the hood, add battery, couple water lines for cooler and done. http://farm8.staticflickr.com/7250/7...b724d7b6_b.jpg http://farm8.staticflickr.com/7267/7...0f2ca34f_b.jpg http://farm9.staticflickr.com/8291/7...863ddfa1_b.jpg that thing beside the brake master need to be in the car for my heater control's to work vac system. so i used a new style fuel filter holder and bolted it up and it works perfect nice and clean. http://farm9.staticflickr.com/8436/7...aeed0c1c_b.jpg http://farm8.staticflickr.com/7140/7...a343331d_b.jpg and while i was board i cut out the spare cap i have for the Extra S gear oil i had, and stuck it on the top of the cap for the water cooler. http://farm8.staticflickr.com/7112/7...c291f278_b.jpg http://farm9.staticflickr.com/8300/7...ba3b9d6e_b.jpg as of now we are pretty much ready to start it up but !! tomorrow my drive shaft shop shaft will be in. then im just waiting on my water coolers for my intercoolers. well it came in !! Drive Shaft Shop one piece aluminum prop shaft. http://farm8.staticflickr.com/7275/7...a77c7772_b.jpg man o man is this thing so light weight. so they told me its 4" inch shorter then a STi shaft. which means even more less weight & 4" inch shorter wheel base. http://farm9.staticflickr.com/8295/7...720a801d_b.jpg http://farm9.staticflickr.com/8300/7...77893946_b.jpg so now just AWIC coolers on back order some time this week or next & weld up my exhaust + muffler + tip & my twin scroll dump tubes. then we start her up ! next week we drive it. well Franz helped set the car up making sure everything was up and working checking over all system a go !! no joke.. the internet is a amazing think, plugged her up via internet next i know he is turning on fans, fuel pump, injectors and so on ! VIDEO no exhaust http://i1260.photobucket.com/albums/...87739834AF.jpg VIDEO with exhaust http://i1260.photobucket.com/albums/...8063D846D5.jpg exhaust http://farm8.staticflickr.com/7273/7...67792ec7_b.jpg http://farm9.staticflickr.com/8429/7...c4637a17_b.jpg http://farm8.staticflickr.com/7120/7...16569d13_b.jpg http://farm9.staticflickr.com/8304/7...98433c3d_b.jpg http://farm9.staticflickr.com/8440/7...1bfe55ba_b.jpg http://farm9.staticflickr.com/8297/7...5c198606_b.jpg http://farm9.staticflickr.com/8308/7...ee8828ba_b.jpg http://farm9.staticflickr.com/8422/7...a14f8047_b.jpg dump pipes http://farm8.staticflickr.com/7274/7...8fb24c0a_b.jpg http://farm9.staticflickr.com/8445/7...189b0539_b.jpg http://farm8.staticflickr.com/7108/7...2facce38_b.jpg so i got my alignment & corner balance done ! thanks to everyone @ NVauto for the great job well done and it feels amazing now.. http://farm9.staticflickr.com/8169/7...4387eec1_b.jpg so the muffler on the car is really shitty sounding like raspy fart can that is so loud. it makes the car look and sound like garboo ! Franz gave me a link to some mad muffler people that don't F around in this department in building a car ! its not cheap but it sure is for life. these exhaust open up, when it wears out then you buy a new core. its high quality no messing around shit ! o and its light weight good god !! this italian salami weights more then the muffler http://www.boronisalumi.it/img/s-milanoz.jpg Aerospace Hardware & Fasteners http://www.coastfab.com/images/fabsh...ler_pieces.gif http://farm9.staticflickr.com/8307/7...2a0114b6_b.jpg http://farm9.staticflickr.com/8441/7...e328de7c_b.jpg my 2x ealr's coolers for my awic system that will be put in once the water reservoir comes in. http://i1260.photobucket.com/albums/...A079C79016.jpg and my father made me a nice aluminm battery bracket to make space for the intercooler water tank. battery is on the strut tower wall now like a boss. http://i1260.photobucket.com/albums/...9FCBEAB40E.jpg http://i1260.photobucket.com/albums/...9FC20B8CD3.jpg maybe a aim cluster ???? (mount it in the glove box) but so i can watch EVERY SINGLE thing going on in the motor section lol right Dov lol. http://farm9.staticflickr.com/8435/7...d929faf9_b.jpg fits nice if i do get it. http://farm9.staticflickr.com/8173/7...c6c15ba7_b.jpg |
http://i1260.photobucket.com/albums/...O/IMG_0038.jpg
http://i1260.photobucket.com/albums/...O/IMG_0032.jpg http://i1260.photobucket.com/albums/...O/IMG_0033.jpg http://i1260.photobucket.com/albums/...O/IMG_0029.jpg well water box is in, its so well made its crazy to put it in there but it must. gave Donny the inch and boom he makes it up fast quick and pressure tested. Dad's Custom Intercooler Tanks http://farm9.staticflickr.com/8458/8...2b6378f8_b.jpg http://farm9.staticflickr.com/8449/8...127efa7e_b.jpg http://farm9.staticflickr.com/8182/8...148cdfe8_b.jpg http://farm9.staticflickr.com/8308/8...e8b4c0ea_b.jpg well Franz has come and gone and it was a busy time while he was here. i had a couple problems that i need to fix to make it work right. so i could not get my dyno time :( My grocery list ! 1... i need to cut vents in the hood because this subaru intake temps are way to hot ! :firedevil: 2... i need to make a safety strap on the drive shaft, also add a little better support on the rear diff so it does not end up on the tarmac ! 3.... move my water coolers in a better place what we have now is a 17psi road tune that to be honest is just crazy to even go to 25psi how fast this car is right now. i am kind of glad i didn't get all the power at once its a tricky car to drive that's for sure. once i fix the problems then 25psi dyno tune will be done, ill push for the end of the season but no promise its getting late and the car needs to be put away soon. Franz pictures http://i1260.photobucket.com/albums/...O/IMG_0142.jpg http://i1260.photobucket.com/albums/...O/IMG_0141.jpg http://i1260.photobucket.com/albums/...O/IMG_0138.jpg http://i1260.photobucket.com/albums/...O/IMG_0140.jpg so in order to lower my intake temps with out cutting my hood i sacrificed my a/c system :( . by getting rid of the a/c system i gained just about 20 degrees off the 60 degree iat temp, out side temp is 20 degree. i just could not cut the hood with out trying the last step, a massive awic cooler (26x7x2). if this does not cool my intake then i am busting the saw out and going to town on the stock hood or the brand new OEM one i have laying around that i picked up for this problem. http://i1260.photobucket.com/albums/...17FA26EFC4.jpg so as of now car runs good at 17psi i am a drifter out of control with awd lol. my gas tank sprung a leak do to the vent line sensor not working should have un plugged it like i did for my legacy ! instead it split it self down the side of the tank like a pop can. a new OEM subaru one is on its way so i can put more then 10bucks in the car and make my way to see Franz and get it tuned on the dyno by the end of this fall weather. http://i1260.photobucket.com/albums/...18011EAA43.jpg http://www.dieboldautosport.com/nico1e.jpg http://www.dieboldautosport.com/nico2e.jpg http://www.dieboldautosport.com/nico3e.jpg http://www.dieboldautosport.com/nico4e.jpg so i went to Washington D.C to visit Franz and he did a little work on the car and he took me to see the crazy city which is just amazing to see and i cant wait to go back for part 2 of the city !! Abraham Lincoln says hello http://i1260.photobucket.com/albums/...0DECE4CB5F.jpg Franz's one of a billion cool tool's he owns ! http://i1260.photobucket.com/albums/...0E0FF396BA.jpg my leone getting all its numbers crunched to perfection ! http://i1260.photobucket.com/albums/...0CA470FB0E.jpg little vid http://i1260.photobucket.com/albums/...0CE70BB965.jpg http://i1260.photobucket.com/albums/...0E33937AB3.jpg franz made me a new shorter pipe from scratch in a matter of minutes, and he gave me the fancy clamps to hold it right. we also put in oil temp, oil pressure, fuel pressure sensors to watch whats going and everything is good ! http://i1260.photobucket.com/albums/...0C946579E3.jpg so much went down this week here is some extra pics from the dyno session, the guys at IMA Motorsports know there Porsche's it was Porsche heaven, i was sourounded buy flat six's with huge turbos making stupid power every where i looked such nice people at IMA Motorsports ! all these porsche made me think why am i messing with this four bangger when subaru made the best six which is a ej22 with a extra 2 lol. http://i1260.photobucket.com/albums/...0ECAE69158.jpg http://i1260.photobucket.com/albums/...10D5CFCD7C.jpg franz baby http://farm9.staticflickr.com/8044/8...76f37041_b.jpg LOL my mamma's car hahahha http://farm9.staticflickr.com/8328/8...ea4efb33_b.jpg le mans http://farm9.staticflickr.com/8048/8...9273f1d3_b.jpg i need to make this stand or buy one like this, need like 10 of them lol http://farm9.staticflickr.com/8468/8...66606a2d_b.jpg |
so i got my STi coupler in
http://farm9.staticflickr.com/8056/8...b9ece317_b.jpg and i am building the air oil separator system witch i can put in soon once my plastic fittings come in mann hummel provent 200 and i welded a nipple for the drain back on my stock dip stick tube. you need a one way valve and i got high temp o rings for the provent 200 lid. the hose is a bmw 1990 325 6 hose witch has a step in it the same size as the provent 200. http://farm9.staticflickr.com/8188/8...fffa0dfc_b.jpg http://farm9.staticflickr.com/8472/8...1cc28bfa_b.jpg |
well my jdm rally book has come in and i think vinyl wrap is coming lol
http://farm9.staticflickr.com/8323/8...b5bdf4df_b.jpg the first rally cars http://farm9.staticflickr.com/8335/8...a96ca05a_b.jpg My LEONE !! http://farm9.staticflickr.com/8335/8...60077636_b.jpg look at the bolt pattern 4 at first next year 5x100 lol... need to vinyl wrap it haha http://farm9.staticflickr.com/8191/8...5727f837_b.jpg my car was the lightest subaru ever made 900kg http://farm9.staticflickr.com/8323/8...8a6362ce_b.jpg My OLD baby !!! http://farm9.staticflickr.com/8185/8...4ebfa9ca_b.jpg http://farm9.staticflickr.com/8052/8...55c9996b_b.jpg |
so my us-plastic stuff has come in and its time to put in my provent 200 & got a little reservoir for the AWIC set up and it works perfect.
http://farm8.staticflickr.com/7271/8...fe23c654_b.jpg here we have it all put together and ready to rock. http://i1260.photobucket.com/albums/...O/IMG_3755.jpg made some brackets out of rod aluminum to hold it in place and its working perfect, oil is being seperated and dumped back the right way. http://i1260.photobucket.com/albums/...O/IMG_3756.jpg also used my factory coolant reservoir and re mounted it to the strut top with a nice aluminum plate. the AWIC reservoir fits perfect in that little corner and its working perfect. http://i1260.photobucket.com/albums/...O/IMG_3757.jpg |
I shit you not, but this is one of the most interesting builds i have seen in a while!! Props to you and keep us updated!! Subscribed!!
|
Stage 1 7670 S200SX 1.00AR, next year for fun Stage 2 S300SX 400whp
http://i1260.photobucket.com/albums/...E81CBA6D1A.jpg |
well i found the most rarest part in japan for my car ! with the help of Yoshifumi @ japan dream direct.. Japan Auto Direct [JAD] Japanese car & motorcycle BOOK & DVD store .
http://i1260.photobucket.com/albums/...402288C5FA.jpg http://i1260.photobucket.com/albums/...4030D927A9.jpg The Leone Turbo OEM Subaru window visor !! http://i1260.photobucket.com/albums/...403E7C610E.jpg http://i1260.photobucket.com/albums/...407E1C5B33.jpg these puppies are made out metal not like the 90's plastic type one's, these one's hold there shape even in wind tunnel testing. they slice the wind like a ninja sword, and cut rain water in half lol http://i1260.photobucket.com/albums/...408B8080BD.jpg http://i1260.photobucket.com/albums/...409263AECF.jpg also got some new track wheels for summer, tire i have not picked yet. http://i1260.photobucket.com/albums/...O/IMG_3767.jpg |
well i am getting ready for next spring and i really need seats for this car the factory seats do not hold you in at all :( ... ill put them in plastic in storage away so no worries lol.
so two choices RECARO blue vintage $2500.00 http://i1251.photobucket.com/albums/...s/DSC_0486.jpg http://i1251.photobucket.com/albums/...eats/BLUE2.jpg http://i1251.photobucket.com/albums/...s/DSC_0491.jpg OR RECARO LS in blue $1200.00 http://dxkdul4cprxwx.cloudfront.net/...5f_820x820.jpg http://dxkdul4cprxwx.cloudfront.net/...fb_820x820.jpg http://dxkdul4cprxwx.cloudfront.net/...aa_820x820.jpg this RECARO $350.00 seat there is only 1 :( which has the same colour !!! FFFFFFFFFFFFFFFFFFFFFFFFFFFFFuuuuckkkkkk http://dxkdul4cprxwx.cloudfront.net/...71_820x820.jpg http://dxkdul4cprxwx.cloudfront.net/...a3_820x820.jpg http://dxkdul4cprxwx.cloudfront.net/...8d_820x820.jpg LEONE inside http://i1260.photobucket.com/albums/...3625484851.jpg http://i1260.photobucket.com/albums/...3636D87C75.jpg http://i1260.photobucket.com/albums/...364123BA62.jpg |
Quote:
|
WOW...
|
| All times are GMT -4. The time now is 10:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.