Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   ISIS Catback quality? (https://www.ft86club.com/forums/showthread.php?t=22661)

lbroskee 11-20-2012 05:39 PM

ISIS Catback quality?
 
Im looking into the Isis catback and ive heard of the company from my 240sx friends, but i cant understand y they r so much cheaper then others. Are they good quality or would i regret buying it down the line?

A5D5TRYR 11-20-2012 06:44 PM

I'd be interested to know as well cause I like the way it sounds, it produced about the second best dyno results in the dsport article and it is priced really competitively. The tips do look cheap but for the money I could easily just buy replacement tips. I know someone on here was complaining that the burnt tips weren't burnt evenly but other than that I haven't seen any quality complaints that I can recall.

post_break 11-20-2012 06:45 PM

I own it. It has a really good design that is very tucked for lowered cars. My tips are angled incorrectly but I just need to take it to an exhaust shop for them to heat and bend the hangers. I love the exhaust.

lbroskee 11-20-2012 06:50 PM

Ok cool. T-minus 2 weeks till i get it then. Wanted to hear from an actual owner other then the guy i met at Enjuku

A5D5TRYR 11-20-2012 06:51 PM

Quote:

Originally Posted by post_break (Post 567478)
I own it. It has a really good design that is very tucked for lowered cars. My tips are angled incorrectly but I just need to take it to an exhaust shop for them to heat and bend the hangers. I love the exhaust.

Any other exhaust mods? I'm curious how the sound changes with a high flow catted front pipe and potentially catless header.

post_break 11-20-2012 09:30 PM

Quote:

Originally Posted by A5D5TRYR (Post 567490)
Any other exhaust mods? I'm curious how the sound changes with a high flow catted front pipe and potentially catless header.

Nothing yet but it will just continue to get nasty and nastier with a test pipe and headers.

lbroskee 11-20-2012 09:41 PM

Quote:

Originally Posted by post_break (Post 567817)
Nothing yet but it will just continue to get nasty and nastier with a test pipe and headers.

Good or bad nasty?

post_break 11-20-2012 11:35 PM

Quote:

Originally Posted by lbroskee (Post 567831)
Good or bad nasty?

Depends on if you like a really aggressive, raspy, in your face boxer sound.

lbroskee 11-20-2012 11:38 PM

I lik the sound of a nicely done STI, lambos, porsche turbos.... So ya i lik aggressive. As long as its clean sounding

Sportsguy83 11-21-2012 02:32 PM

It has been discovered it is made in China. FWIW.....

Now, if that affects in any way your decision to get it or not is entirely a personal choice :)

See thread:

http://www.ft86club.com/forums/showt...highlight=isis

empower-auto 11-21-2012 02:41 PM

Not all things made in China are made equal. It's hard to engage in some critical thinking but .. when someone has something made overseas there is a wide range of standards by which their product can be produced - and it comes down to how much they want to spend.

I've seen product coming out of China that is really indistinguishable from something made with care domestically .. and I've also seen a ton of product that is complete .. thoughtless .. cheap junk. Because if the state of the car market these days - and everyone wanting a "bargain" (1000 sets of Rota's sold per 1 set of say, Work wheels) you're more likely to find a company on the CHEAP end of the spending spectrum.

Now as far as ISIS goes - I have very little hands-on experience with their products so I can't offer a review. What I can offer is some advice: research things that matter. Country of origin doesn't mean as much as we'd like to think.

Invalid 11-21-2012 04:02 PM

Design is good, Quality is sub standard.

Don't bad mouth China too much. Our Iphone's and Ipads are made in China

Sportsguy83 11-21-2012 05:11 PM

Quote:

Originally Posted by Invalid (Post 569000)
Design is good, Quality is sub standard.

Don't bad mouth China too much. Our Iphone's and Ipads are made in China

Basically EVERYTHING right now is made in China. The difference (using the ipad/iphone example) is that the Ipad/Iphone is made in a tightly controlled (by Apple, USA) environment. So basically what empower-auto holds true. You can get GREAT quality, like you can also get junk. IMHO I wouldn't put my hand in the fire for designs coming from China with little to no oversight and/or control.

A5D5TRYR 11-21-2012 07:11 PM

Quote:

Originally Posted by Invalid (Post 569000)
Design is good, Quality is sub standard.

Don't bad mouth China too much. Our Iphone's and Ipads are made in China

I'm not saying you're wrong, but what makes you say the quality is substandard? Just wondering if you have personal experience or anecdotal evidence that these aren't built very well.


All times are GMT -4. The time now is 04:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.