Corner Balancing
 

Just had the guys at Infinite Motion in San Marcos dial in and corner balance my car after I installed KW V3s. Did awesome work and was very meticulous. This is with me in the car and a half tank of gas.

Intercomp
RaceWeigh Desktop
11/12/2012 11:40:16 AM


Gen FRS
11/12/2012 10:39:45 AM


LF: 855
RF: 742
LR: 649
RR: 634
Total: 2880


Front: 1597 / 55.45 %
Rear: 1283 / 44.55 %
Left: 1504 / 52.22 %
Right: 1376 / 47.78 %
Cross: 1391 / 48.3 %
Select: 0 / 0 %
Rear Bite: 59


After:
--------------------------
Intercomp
RaceWeigh Desktop
11/12/2012 11:57:20 AM


Gen FRS
11/12/2012 10:39:45 AM


LF: 830
RF: 766
LR: 675
RR: 614
Total: 2885


Front: 1596 / 55.32 %
Rear: 1289 / 44.68 %
Left: 1505 / 52.17 %
Right: 1380 / 47.83 %
Cross: 1441 / 49.95 %
Select: 0 / 0 %
Rear Bite: 0

Good to see they fixed the cross, but how did the car gain 5 pounds with the "after"?

I had a big lunch? :D

Most likely from how it settled on the scales. If I moved at all the weight would jump around +-5 lbs.

Oh you were actually sitting in the car, LOL. Yes a big lunch would do it! A lot of the shops I've seen put a blanket or box in the seat and load it with dumbbell weights.

Nice. I've been looking at the KWV3's and this is something I would also want to get done, it's nice to see the results.

What sort of drop are you seeing with the KWV3's? I want as close to stock as possible. Roads around here are unforgiving and my driveway has minimal clearance.

I think minimum is .75" drop and I went for about 1.25" lower than stock. I still find it pretty reasonable for getting around town and in and out of driveways.