Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Installed nameless trackpipe (https://www.ft86club.com/forums/showthread.php?t=20840)

sevi21 10-27-2012 10:41 PM

Installed nameless trackpipe
 
Got my trackpipe in the mail from nameless yesterday and i put it on today, Love the sound definitely can hold me over until i can get a catback. Also put a dc tip on for a little bit more appealing look. Alot deeper sound over stock, not too loud really either. Easy install, took me about 15 minutes to take the stock axle back off and throw this thing on. Sorry about the pics, taken off my bionic and was dark by the time i got done. :party0030:

http://img853.imageshack.us/img853/9349/dctip2.jpg



http://img4.imageshack.us/img4/1664/dctip1.jpg

CBR600RR 10-27-2012 10:48 PM

Looks good with the tip, but i think it would look better if the tip was pushed in more.

sevi21 10-28-2012 12:14 AM

Quote:

Originally Posted by CBR600RR (Post 524115)
Looks good with the tip, but i think it would look better if the tip was pushed in more.

yah i agree, unfortunatly the pipe has a bend in it very close to the bumper and it wont slide in much more, i will try again in the morning and post more pictures with a fix for it. Thanks for the feedback :thumbup:

jm1681 10-28-2012 10:32 AM

Got and installed mine the other day as well :) GREAT gateway mod XD

Pulling my stock axle-back was absolute hell (Could NOT get the bolts loose), but well worth it :)

sevi21 10-28-2012 11:51 AM

Quote:

Originally Posted by jm1681 (Post 524625)
Got and installed mine the other day as well :) GREAT gateway mod XD

Pulling my stock axle-back was absolute hell (Could NOT get the bolts loose), but well worth it :)

Really? only little problem i had was one of the rubber shock absorbers wouldnt let go of the muffler! :lol:

Neziah 10-28-2012 03:00 PM

Quote:

Originally Posted by sevi21 (Post 524662)
Really? only little problem i had was one of the rubber shock absorbers wouldnt let go of the muffler! :lol:

Try spraying a little WD-40 on them, helps them slide off the hanger a little easier.

jm1681 10-28-2012 11:59 PM

Quote:

Originally Posted by sevi21 (Post 524662)
Really? only little problem i had was one of the rubber shock absorbers wouldnt let go of the muffler! :lol:

Conversely, I had the hangers off in seconds. The bolts? 45 minutes of PBlaster, graphite, liquid wrench, WD, you name it.

OrbitalEllipses 10-29-2012 03:20 AM

Quote:

Originally Posted by jm1681 (Post 525612)
Conversely, I had the hangers off in seconds. The bolts? 45 minutes of PBlaster, graphite, liquid wrench, WD, you name it.

Odd, completely backwards from what I did.

jm1681 10-29-2012 08:53 AM

Ah, I might add, we were using an 8" socket wrench ;) We had NO leverage, and the car was NOT jacked up at the time, so we did all this bracing against the driver's side rear wheel.

...but anyway, I freakin' love this mod XD Cheap as free, and I didn't even have to jack up my car to do the swap (Though it probably would have saved me all that aggravation XD).

sevi21 10-30-2012 09:18 PM

Quote:

Originally Posted by jm1681 (Post 525996)
Ah, I might add, we were using an 8" socket wrench ;) We had NO leverage, and the car was NOT jacked up at the time, so we did all this bracing against the driver's side rear wheel.

...but anyway, I freakin' love this mod XD Cheap as free, and I didn't even have to jack up my car to do the swap (Though it probably would have saved me all that aggravation XD).

Yah i used a floor jack and a 10 in socket wrench... Super easy for me haha :bellyroll: but yah i totally agree, awesome mod!!!

ABQautoxer 10-30-2012 09:33 PM

I used my smaller 1/4" impact driver and got the bolts off easily in seconds. The damn muffler hangers even lubed were a mega pain.


All times are GMT -4. The time now is 05:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.