Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Australia Classifieds (https://www.ft86club.com/forums/forumdisplay.php?f=57)
-   -   AVO Turbo Kit for Oz (https://www.ft86club.com/forums/showthread.php?t=20628)

86drift 10-24-2012 10:48 PM

AVO Turbo Kit for Oz
 
The price inc GST is $4,400.
To secure one of the the kits I'll need a $500 deposit.

The kit includes an EcuTek tune and the stage 2 tune when it's released. Stage 2 will require hardware purchases such as MAP sensor, injectors, etc.
You will need to purchase an EcuTek licence to run this kit or use a standalone/piggyback solution. The licence can be purchased from AVO or any other EcuTek supplier.

Optional Parts:
AVO 2.5" stainless steel cat-back exhaust for turbocharged vehicles (MSRP $990.00)
AVO high-flow panel filter for the BRZ and FR-S (MSRP $55.00)
AVO Blow-off Valve Kit (MSRP $220.00)
ProECU Programming Kit

For details of the kit see this thread.

http://www.avoturboworld.com/media/ceramic_coat_001.jpg

http://www.avoturboworld.com/images/...1_turbokit.jpg

ZZT86 10-24-2012 11:42 PM

I like the colour, makes it harder to detect !

tibsy92 10-26-2012 12:21 PM

woo yes definitely.. even comes with unequal length exhaust manifold :drool:
my christmas present to myself.
still undecided if i want avo or another. i will be letting you know by monday :cool:

86drift 10-26-2012 05:23 PM

Quote:

Originally Posted by tibsy92 (Post 521763)
woo yes definitely.. even comes with unequal length exhaust manifold :drool:
my christmas present to myself.
still undecided if i want avo or another. i will be letting you know by monday :cool:

You want AVO :-P

Cnidus 10-26-2012 06:10 PM

You know I'm keen. Send me bank details for deposit?

-Doug

Paragon 10-26-2012 07:23 PM

So how much would the kit likely cost all up installed and tuned?

Paragon 10-26-2012 07:27 PM

And has there been any dyno graphs released?

natedogg86 10-26-2012 08:59 PM

Quote:

Originally Posted by Paragon (Post 522542)
And has there been any dyno graphs released?

Yes there are graphs on the link in op. I think its about 90whp increase at stage 1, not sure of stage 2. 90whp is perfect imo.

GaN-MaN 10-26-2012 09:04 PM

Mmmm... So tempting.
Looking at wallet and thinking should I, or shouldn't I.

Does that price include postage to our door or is that extra?
Thanks.

czar07 10-26-2012 10:44 PM

mhm..need to retain that warranty...cmon TRD supercharger!

Kenno 10-26-2012 11:22 PM

Quote:

Originally Posted by 86drift (Post 518660)
You will need to purchase an EcuTek licence to run this kit or use a standalone/piggyback solution. The licence can be purchased from AVO or any other EcuTek supplier.

From memory, which is pretty bad, I seem to recall the EcuTek license being around $250-300? Will we also need to purchase the EcuTek cable too?

86drift 10-27-2012 01:50 AM

Quote:

Originally Posted by Paragon (Post 522533)
So how much would the kit likely cost all up installed and tuned?

PM me.

Quote:

Originally Posted by GaN-MaN (Post 522706)
Mmmm... So tempting.
Looking at wallet and thinking should I, or shouldn't I.

Does that price include postage to our door or is that extra?
Thanks.

I'll get back to you about postage. If I can't include it, it will be cheap.

Quote:

Originally Posted by Kenno (Post 522916)
From memory, which is pretty bad, I seem to recall the EcuTek license being around $250-300? Will we also need to purchase the EcuTek cable too?

Your memory ain't too bad. Visconti sells licences and cables. You can buy the cable or I have a loaner you can borrow to flash your ECU. The cable has good data logging inc oil temp so I'd recommended getting one.

proficience 10-27-2012 03:40 AM

So I'm guessing MRT is going to stock the AVO kit according to their latest post on their fb page (quoted for those without fb):

Quote:

Hey, BRZ and 86 owners Who is ready for a turbo kit, Supplied, fitted and tuned for UNDER $7500???
+ Turbo
+ Intercooler
+ Manifold
+ Oil scavenge pump
+ Silicone pipe kit
+ Labour
+ EcuTek Australia ECU custom Dyno tune
https://fbcdn-sphotos-f-a.akamaihd.n...99138696_n.jpg
Looks like the AVO kit to me...

JP 10-27-2012 05:03 AM

lol, $3200 for fitting and tuning... they sure know how to charge!


All times are GMT -4. The time now is 12:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.