HOW to lower BC Coils
 

i saw a video but not sure how to do it.

does anyone have step by step on rears and fronts.

I would spend the money and take it to a local shop to watch them doing it the. You wont have. Problem doing it yourself next time

there is no shops around me that do aftermarket installations.most of them are like 1 hr away

LOL. There are about 100 performance shops on Long Island from Queens, to Suffolk

Do you want instructions on how to install the coilovers, or how to lower the car once they're already installed?

ive installed them already, i just need to go lower on the front but dont know how

im in Southampton lol

can you do it? if so how much just to lower the fronts and readjust my preload as i think i messed it up lol

[ame="http://www.youtube.com/watch?v=Dc1u2_SwiLo"]DIY: How To Adjust Coilovers - YouTube[/ame]

or have you already tried adjusting it already and think it's uneven?

I cant get it lower

take a picture of your coils as they sit on your car and I'll tell you what you need to do.

So the two upper lock rings for the spring perch are up against the lower lock ring like this?
http://i.imgur.com/Jr9E7.jpg

If so, then you'll need to spin the lower mount off and remove the lower lock ring so that the two rings that make up the spring perch are directly against the lower mount.

Otherwise you're as low as you'll go. Time to regret your coilover purchase and start saving for airbags, brah.

That's seriously what I was getting at^