Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Other Vehicles & General Automotive Discussions (https://www.ft86club.com/forums/forumdisplay.php?f=6)
-   -   Need list of Wheels (https://www.ft86club.com/forums/showthread.php?t=2020)

Giccin 10-21-2011 12:02 AM

Need list of Wheels
 
So shopping around for some 15'' for my BF's little FIT. lol

But my knowledge of wheels are very VERY limited.

If you guys are bored out of your mind and forums is somewhat moving slow... could ya give me a few light weight brands we could pick off of?

I googled a bit and I found this forum and post. So.. something like this would help me do some searchin' around. :)

Quote:

BBS:
High-quality, expensive forged wheels that are very strong.

Enkei:
Prices vary widely, but even their less expensive cast wheels are typically well built.

OZ Racing:
They offer a wide variety of wheels, but their mid-grade wheels are reasonably priced and unique in that they're known for their use of low-pressure casting. OZ does what it takes to make their wheels strong.

SSR:
Uber-lightweight semi-solid forged wheels that are slightly cheaper than their forged competition.

Volk, or Gram Lights, or any wheel manufactured by Rays Engineering:
Uber-lightweight forged wheels that are normally quite expensive.
Gratsi muchos guys. :>

blur 10-21-2011 12:11 AM

Check out rotas.

http://htarchive.org/attachment.php?attachmentid=91930

Giccin 10-21-2011 12:13 AM

That's some gangster stuff you got there Blur. LOL

blur 10-21-2011 12:20 AM

Quote:

Originally Posted by Giccin (Post 65415)
That's some gangster stuff you got there Blur. LOL

:happy0180:

Varrstoen also just came out with a new 15 inch wheel.

http://varrstoen.com/blog/?p=1978

http://i10.photobucket.com/albums/a1...7243edited.jpg

farugah 10-21-2011 08:35 AM

id love a set of Rota Grids for my Legacy but i just cant bring myself to do it, She looks so sexy instock form.

mkivalex 10-24-2011 03:37 PM

enkei rpf1's are cheap and light, better quality than rota.

RRnold 10-24-2011 03:43 PM

Mugen M7s!

(don't know why this dude went staggered on a FF car!)
http://carphotos.cardomain.com/story...0009_large.jpg

Here is another pic! If look carefully, you'll see them...don't get distracted! :bellyroll::bellyroll::bellyroll:

http://2.bp.blogspot.com/-HegKkQeaVf...0/Mugen-M7.jpg

Dave-ROR 10-24-2011 04:17 PM

Outside of the dirty whores I'd absolutely hate a car show like that.

There are TONS of wheels that fit the fit. Depends on what you want width wise, offset, looks and budget.

sfwg 10-24-2011 04:39 PM

Quote:

Originally Posted by mkivalex (Post 66130)
enkei rpf1's are cheap and light, better quality than rota.

x2 if thy made them in decent offsets/widths for 4 lug i d be rocking them right now

oneday 10-24-2011 04:49 PM

I highly recommend the Enkei Racing line of wheels. They are durable, super light, and reasonably priced. The RPF1 and PF01 are the two lightest and least expensive they offer.

PF01: 15x7 (<13lbs) or 16x7 (<15lbs)
http://www.enkei.com/images/pf01-large.jpg
http://www.enkei.com/images/race-series/pf01-black.jpg

RPF1: 15x7 (<10lbs) or 16x7 (<14lbs)
http://www.enkei.com/images/race-series/rpf1-large.jpg

Giccin 10-24-2011 04:53 PM

Quote:

Originally Posted by Dave-ROR (Post 66141)
Outside of the dirty whores I'd absolutely hate a car show like that.

There are TONS of wheels that fit the fit. Depends on what you want width wise, offset, looks and budget.

I don't necessarily hate car shows. I hate most of the MEN yes MEN there. Most of the girls that I see there (the drivers) are so much more friendly. I can learn from them. From guys.. all I get are dirty looks and "don't fucking touch my car or ask about my car. Only models and men can."

Beh. :L

Some car meets are cool. Most of the time I don't like going to them.. even though I sometimes like too.

VenomRush 10-24-2011 05:15 PM

please dont mention rotas anymore.. i cringe at the thought of the name

check out the work meister cr 01.. i think those will look perfect on a fit

Abflug 10-24-2011 05:39 PM

I would go for used wheels

http://www.memoryfab.com/wheels/used/15/page/

http://www.pandagarage.com/products/15.html to bad the Watanabe´s are sold

http://www.icbmotorsport.com/rarejdmrims.html

http://www.jdm-wheels.com/used.html

Giccin 10-24-2011 06:05 PM

Quote:

Originally Posted by Abflug (Post 66157)


Cool.

Thanks Tom and Venom.

Also. Since it's a wheels thread.. I'll merge my tire thread here too..

IF. The FRS/BRZ gets 17'' wheels is it possible to downsize to 16''? I remember hearing you can't but I can't say for sure until it's been... confirmed. Lol


All times are GMT -4. The time now is 03:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.