WTB adjustable endlinks - any brand. PM me if you have one for sale

Long shot but figured I’d post and try

WTB: authentic SARD carbon spoiler. Not looking for replicas.

Looking for a used set of drambeenie risers if anyones had them and parted out or whatever but have hung onto them.

My friend in Japan is looking for a set. Thanks!

Anyone selling adjustable front endlinks?

bump.

$200 OBO

Selling New, never used OpenFlash Tablet V2 BRZ FR-S GT86
Send a direct message if you are interested.
$400 firm


Sent from my iPad using Tapatalk

Some free stuff:

Kartboy rear shifter bushing (160k miles)
Heated seat switch (burned out led)
eBay carbon heated seat switch cover/dash vent covers
eBay rubber console tray, BRZ cubby tray, FRS cubby tray, brz/FRS cup holder rubber mat
2x oem silver gas/brake pedals (half worn)

https://i.imgur.com/GSXT3Ji.jpg

https://i.imgur.com/FKNZlXe.jpg

Bump

Looks like someone in Tracy is selling theirs for $600.

https://www.facebook.com/marketplace...type=top_picks

Parting out built moto/turbo build

Selling motor built by Moto East capable of 650+hp motor is stripped down. Blown head gasket and scorched 1 out of 4 pistons everything is in good shape.

Motor internals-Carrillo rods, Cp pistons 10.1 CR, king main oil bearings, Remix oil pump. Motor has less than 13k miles since rebuild less than 18k miles in total on motor!!-$$ BEST OFFER

Also selling a MAP turbo kit, infamous EBC, turbo smart race port bov, turbo smart wastegate offered from map, precision 5858 turbo, Dw 65c fuel pump I believe, and fic 770cc fuel injectors great condition less than 13k on the kit total-$ BEST OFFER

Manual Trans, drive shaft, great condition less than 25k

Also selling-Act Xtclutch disc and plate less than 3k miles on it-$ BEST OFFER

Willing to work out a killer deal if someone is looking to buy a good amount of it!! PM me of interested

Sent from my SM-S908U1 using Tapatalk

Thanks. The guy didn’t want to sell it for the longest time then sold it. I’ll just have to wait for another one or until shipping prices are more reasonable.

WTB

2013 Scion OEM struts, springs, and top hats.

I need them while I rebuild my KW V3s.

I'm in the Santa Cruz area, but work at Palo Alto.

Cheers

Sent from my Pixel 6 using Tapatalk

FOR SALE - Invidia High Flow Front Pipe and N2 Exhaust
 

Selling my Invidia exhaust parts. They're in good condition - all hardware included (except for gaskets, since they're already used).
I'm located in the Sacramento area.



Invidia High Flow Front Pipe - $250
https://i.ibb.co/bWxt6fL/IMG-2017.jpg
https://i.ibb.co/gryqw33/IMG-2018.jpg


Invidia N2 Exhaust w/ Titanium tips (ftspeed.com exclusive) - $250
https://i.ibb.co/cQXYjF4/IMG-2016.jpg


BUY BOTH? $400 total ($100 off)
https://i.ibb.co/wS60wXL/IMG-2014.jpg

bump
obo

Set of Rays Gram Light 57xtreme 17x9 5x100 40mm wrapped in Indy 500 245/40 (less than 3000 miles). Original color is black but was recently professionally painted white. One wheel has mild curb rash that has received touch up paint. Looking to get $1200 preferably picked up in Stockton area. Willing to meet anywhere else.

https://scontent.fsac1-1.fna.fbcdn.n...Dg&oe=62DE4E23

https://scontent.fsac1-1.fna.fbcdn.n...gA&oe=62DDBF4C

https://scontent.fsac1-2.fna.fbcdn.n...Ng&oe=62DCE57A


https://scontent.fsac1-2.fna.fbcdn.n...7Q&oe=62DCBC0B

https://scontent.fsac1-1.fna.fbcdn.n...1Q&oe=62DDA1C1

https://scontent.fsac1-1.fna.fbcdn.n...Dw&oe=62DC922A

https://scontent.fsac1-1.fna.fbcdn.n...VA&oe=62DD0852

Please don’t make me deal with Facebook and grab these in the next week or so.

Tomei EL header - Sold [$400]
Had on the car for maybe 20k-30k miles, discoloration from use, a few rub marks on the skidplate but otherwise excellent condition, bungs thread easily, welds look good, some carbon buildup but otherwise beautifully made. I wish my jdl was built this nice.

Mann Engineering 13mm rear sway bar $160
3 hole adjustable from stock bar stiffness to softer. A few rub marks from installation, other then that nothing wrong with it. On the car for maybe 15k miles?

Whiteline 20mm front sway bar $160
2 hole adjustable, some rub marks from the front wheels, no problems. On the car for ~40k miles

Megan racing end links front adjustable- $80
These came with my coilovers, shorter length for specific coilovers, newer locknuts. No guarantee they fit your setup and honestly I want them around as backups but I’m not using them anytime soon.

https://i.imgur.com/aQ3ry6g.jpeg

I also have a set of SPC rear toe arms, forgot to take pics today, will do tomorrow.

I live in East Bay, work in South Bay, can meet in the greater Bay Area. Cash is king but we can do an app.
I'll also be at Crows tomorrow if you message me tonight.

More pics:
https://imgur.com/a/nO8a7nd

Sent a PM

Selling Seibon-Carbon Fiber Sideskirts Ts stylr (driver side part is damaged) passenger side great condition.. (Letting go for cheap)

Also selling stock frs seats and asphalt gray trunk.

Pm for pics and more info.

Local to fremont/sj/hayward area. Open to doing local meetup.

Very negotiable!

Anyone selling a bumper in G1U and a duckbill?

Parting out built moto/turbo build

Selling motor built by Moto East capable of 650+hp motor is stripped down. scorched 1 out of 4 pistons everything is in good shape.

Motor internals-Carrillo rods, Cp pistons 10.1 CR, king main oil bearings, Remix oil pump. Motor has less than 13k miles since rebuild less than 18k miles in total on motor!!-$$ BEST OFFER

Also selling a MAP turbo kit, infamous EBC, turbo smart race port bov, turbo smart wastegate offered from map, precision 5858 turbo, and fic 770cc fuel injectors great condition less than 13k on the kit total-$ BEST OFFER

Manual Trans, drive shaft, great condition less than 25k

Also selling-Act Xtclutch disc and plate less than 3k miles on it-$ BEST OFFER

Willing to work out a killer deal if someone is looking to buy a good amount of it!! PM me of interested

Sent from my SM-S908U1 using Tapatalk

Items are all still for sale. Willing to let go for good deal. :)

BNIB Pedders offset top hats and Whiteline camber bolts. Decided to go straight to coilovers instead...

$150 obo for both
$125 for camber plates and $25 for bolts separate

Attachment 214376

Located in Foster City but willing to deliver within an hour or so.

Hi all,

I'm selling my Gen2 BRZ so I have a handful of parts that were never used/installed except for the exhaust which I ran for about 200-300 miles, if that.

Local pick up preferred (SF Bay Area) or ship on you


Billetworks Short shifter w/ install kit (Red) --- $220
Perrin Rear Shifter Mount Bushing --- $30
HKS 2022+ Subaru BRZ Hi-Power Muffler SPEC-L --- $850 (slight dent on tip, check my post history for photo)
AWE Touring-to-Track conversion kit --- FREE (you still need the full Touring exhaust for this FYI) --- CLAIMED
Subaru Sunshade - SOA3991530 --- $45

1x oil filter w/ crush washer -- $4 each

I bought these at dealer discount from MSRP, sale price next to part #.

STI Door Handle Cup Protector (comes in a single pair) --- $25 - J1210CA500 --> $20 (pending)
STI Under Spoiler - Rear Quarter --- $288 - E5610CC000 --> $250
Fender Vent Accent --- $118 - E7110CC000 --> $ 80
STI Under Spoiler - Side --- $424 - E2610CC000 --> $380 (pending)
STI Under Spoiler - Front --- $339 - E2410CC000 --> $300 (pending)




Thanks

For Sale: SF Bay Area - $1500

New Lightweight 720 Form GTF1 Wheels + Tires

17x8 Front +35 Offset - 215/45/17 Michelin PS4

17x9 Rear +35 Offset - 245/40/17 Yokohama Advan Sport

Installed one weekend for a car show

100 miles approximately

Perfect Condition - No flaws - No curb marks - No rock chips

Front Wheels weigh 15.5 lbs. and Rear Wheels weigh 16.2 lbs.

Front Tires weigh 19 lbs. and Rear Tires weigh 21 lbs.

Pics are with factory suspension - stock ride height

Spoke cutouts are silver color

https://i.postimg.cc/KvBHm9dQ/DSC01080.jpg

https://i.postimg.cc/7PczyWQR/DSC01051-X.jpg

ISO Front end links and LCA (SPC, Whiteline, Megan)

Located SJ/Milpitas

Bump

B

Still for sale, if anyone wants

Selling my Verus 2-piece front splitter - $360 OBO

(13-16 BRZ only). Used for a few years so there is wear and tear. Splitter itself is slightly bent upwards at the leading edge.

It also includes Verus endplates and air dam. Nearly all the necessary installation hardware is included, but you will need to buy (from Verus):

1x m6 rivet nut tool
1x #10 rivet nut tool
6x #10 rivet nuts

Please PM me with any questions.

https://i.imgur.com/LWaH2mG.jpg?1

https://i.imgur.com/aU2k17Y.jpg

https://i.imgur.com/0Do4pef.jpg

JDL Unequal Length Headers & OFT V2 Tablet
 

Sold!

Anyone selling a shift knob? Looking for an aftermarket knob.

You can have my OEM knob if you want it

Hey, thanks for the offer! I'm looking for an aftermarket one. I have fixed my original post. Sorry about that.

Price drop bump

Hi everyone,

I have the following items up for sale. Reason for sale, if you are wondering, returned car back to stock for smog and no longer have the urge to reinstall/modify the emissions of the vehicle. See the attachments!



1. Redesigned ACE 350 header. This was a warranty replacement from ACE back in 2021. It has not seen and track days, just daily driving to and from work. They have been wrapped with heat shielding which can be removed if requested. In addition to the header, the price includes ECUtek cable and dongle with a valid license.

Price: $1700 w/ecutek or $1600 w/o ecutek firm.



2. Grimspeed intake (wrinkle black). This was purchased and used for one track day at thunder hill. I applied some heat reflective tape to the bottom of the box to help reduce intake temps on the track. I do not have any numbers to prove the effectiveness...but it is there! There are 3 bolts missing for the cover, but I used the bolts from the stock intake to secure the cover. The filter still looks good but could use a new one. All other hardware is included.

Price: $250 firm

Looking for a local sale (Hayward). Please shoot me a message for my availability, I am typically free from Sunday - Wednesday. Thank you!

Looks like half ass job in the welds...

35W morimoto HID ballasts XB35 $55
 

Changed to LED headlights so no need for these. Works perfectly fine $55 OBO pickup in SF area

For sale

- USED Invidia N2 Mid Pipe (2013+)
- Sacramento/Bay Area
- $120

Pmed. very interested

Free: two stock axleback exhausts
Free: one Borla EL header - first generation - cracked but weldable.
Free: one stock driveshaft
In Castro Valley